THREE ARMORED RAIL SIGHTING SYSTEM GREEN DOT OPTIC WITH RED LASER INSTRUCTIONS
THREE ARMORED RAIL SIGHTING SYSTEM This Green Dot Reflex Sight with an Integrated Red Laser is a compact Optical system, packed with many features. You have the Green Dot as your primary targeting system and a Red Laser as a secondary targeting device. You can use the Green Dot or Red Laser individually or you have the option to use both the Green Dot and Laser at the same time. The Red Laser can be used for quick point shooting at targets close to the shooter, in low light conditions.
MOUNTING THE OPTIC: This Optic is equipped with a Quick Release Weaver style & Picatinny rail type mount with an Auto-Locking Latch. To attach the Optic to a Weaver or Picatinny style rail, move the Auto-Locking Latch located within the Quick Release Lever away from the pivot point (to unlock the lever) and then swing the Quick Release Lever to the forward (Open) position. Place the Optic onto the rail, with the Recoil Lug placed into one of the cross slots on the rail.
ZEROING YOUR GREEN DOT SIGHT: ADJUSTING THE GREEN DOT WINDAGE AND ELEVATION: The Green Dot Sight is equipped Windage and Elevation Dials on the right side of the Main Body. The Elevation Dial is located on Right side of the Main Body, closest to the front of the Optic. Use a flat blade screwdriver or small coin to make adjustments. Turning the Green Dot Elevation Dial Clockwise will move the Green Dot Up. Moving the Bullet impacts Down from the point of aim.
DANGER: AVOID DIRECT EYE EXPOSURE TO THE LASER BEAM. LASER RADIATION IS EMITTED FROM THE APPERTURE. CAUTION: AVOID SHINING THE LASER IN YOUR EYES, AND THE EYES OF OTHERS AROUND YOU. THE LASER EMISSIONS CAN CAUSE SERIOUS INJURY TO THE EYE INCLUDING BLINDNESS ZEROING YOUR RED LASER SIGHT ADJUSTING THE LASER WINDAGE AND ELEVATION: The integral Red Laser is adjustable for both Windage and Elevation.
CARE AND MAINTENANCE Your Green Dot Optic is a factory sealed unit, please do not attempt to take it apart or clean it internally. The exposed Optical lens surfaces will perform their best if they are routinely cleaned with a lens brush and the lens cloth provided with your sight. For a deep cleaning, you can also use high quality camera lens paper and camera lens cleaning solutions.
THREE ARMORED RAIL SIGHTING SYSTEM GREEN DOT OPTIC WITH RED LASER FOR TECHNICAL ASSISTANCE CALL: 1-866-NcSTAR-8 (1-866-627-8278) WWW.NCSTAR.