MARK III SERIES SCOPE INSTRUCTIONS 1
NcSTAR MARK III SERIES SCOPE Congratulations on the purchase of your New NcSTAR MARK III Series Scope! The MARK III Series of scopes gives you many great options, so you can choose the scope that best fits your needs. Backed by a Lifetime Limited Warranty, your NcSTAR Scope will provide you with years of reliable service. This Owner’s Manual will help you understand all of the features of your new scope. Follow all instructions carefully before initial use, to experience the best performance.
Your NcSTAR Scope is factory set with a Centered Reticle necessary for efficient sighting-in. If you have made any prior adjustments to the Elevation and Windage settings it will be necessary to recenter the reticle. Turn the Elevation Adjustment Dial [E] in either direction until it comes to a complete stop. Next, turn the dial in the opposite direction, counting the number of clicks, until you have reached the limits of the adjustment range.
Windage and Elevation Adjustment Dials The Mark III scope is equipped with Target Style Elevation and Windage Turrets, which change your scope’s point of aim relative to your rifles point of impact. The Elevation Adjustment Turret [E] is located on top of the Turret Body, and is responsible for the up and down movement of the reticle. The Windage Adjustment Turret [F] is located on the right side of the Turret Body, and is responsible for the left and right movement of the of the reticle.
Zeroing your Scope After you have completed the installation of your scope it will be necessary to adjust the scopes point of aim to match the rifles point of impact. This can be accomplished using several methods, but we recommend the use of a Bore Sighting Device to save time and ammunition. Using a Bore Sighting Device will ensure that your shots land “on paper”. Follow the Manufacturer’s Instructions for the Bore Sighting Device that you choose in order to achieve the best results.
Illuminated Reticle The MARK III Series Scope is equipped with a Reticle that can be illuminated in green for use when exterior lighting conditions are less than optimal. Control of the illumination is achieved by simply rotating the Rheostat Knob [C] in one direction or the other. If you look closely at the side of the Rheostat Knob [C] you will notice a series of numbers. “0” represents the Off position. If you turn the knob in either direction the reticle will illuminate green.
NcSTAR MARK III Series Scope Specifications ITEM # RETICLE SM3P15640G P4 SNIPER SM3R15640G RANGEFINDER SM3M15640G MIL-DOT SM3P251040G P4 SNIPER MIL-DOT SM3P41650G P4 SNIPER SM3R41650G RANGEFINDER SM3M41650G MIL-DOT NET WEIGHT (oz.) LENGTH (in) CLICK VALUE 2.0" - 3.5" 26.7 - 6.7 mm 18.3 12.5" ½ MOA 32.5 - 8.9 2.0" - 3.5" 16.0 - 4.0 mm 18.3 13.0" ¼ MOA 25.8 - 6.1 1.5" - 3.0" 12.5 - 3.1 mm 21.2 14.5" ¼ MOA TUBE DIAMETER OBJECTIVE DIAMETER (mm) 1.5X - 6X 30 mm 40 mm 34.
MARK III SERIES SCOPE FOR TECHNICAL ASSISTANCE CALL: 1-866-NcSTAR-8 (1-866-627-8278) WWW.NCSTAR.