OCTAGON SCOPE SERIES INSTRUCTIONS 1
OCTAGON SCOPE SERIES Congratulations on the purchase of your NCSTAR Octagon Scope Series! The Octagon Scope Series has several scope models to choose from: the choice of two different magnification ranges and two reticles types, with many of the popular scope features that shooters demand. Backed by a Lifetime Limited Warranty, your Octagon Scope will provide you with years of reliable service. This Owner’s Manual will help you understand all of the features of your new scope.
Relief setting aim the reticle at a plumb line. Align the vertical cross hair of the reticle with the plumb line by rotating the scope within the rings. Once you are satisfied with your scopes settings and placement, tighten the rings screws evenly and securely to approximately 10 to 15 inch lbs. of torque (Not foot lbs.) with an inch pound torque wrench/screw driver. Be sure not to over tighten the rings, as doing so can cause permanent damage to the scope.
On the top of each Adjustment Dial you will notice that there are arrows indicating direction of movement. Turning the Elevation Adjustment Dial counter-clockwise will shift the bullet point of impact up, and turning it clockwise will shift the bullet point of impact down. Turning the Windage Adjustment Dial counter-clockwise will shift the bullet point of impact right, and turning it clockwise will shift the bullet point of impact left.
It is important to remember that many factors can affect the accuracy of your scopes zero including ammo type, temperature, humidity, elevation, distance, angle, and other conditions. Changing ammunition brands can affect accuracy as well. Illuminated Reticle There is a raised dot on the Rubber Armor as an Indicator Mark on the Ocular Bell Housing, for the Illuminated Reticle settings.
Care and Maintenance Your NCSTAR Octagon Scope Series Scope is shock, fog, and water proof. However, you should never try to take it apart or clean it internally. The exposed optical lens surfaces will perform their best if they are routinely cleaned with a lens brush or a lens cloth. For a deep cleaning, you can also use high grade camera lens paper and camera lens cleaning solutions.
OCTAGON SCOPE SERIES FOR TECHNICAL ASSISTANCE CALL: 1-866-NcSTAR-8 (1-866-627-8278) WWW.NCSTAR.