MARK III TACTICAL SERIES GENERATION 2 INSTRUCTIONS
MARK III TACTICAL SERIES GENERATION 2 The Mark III Tactical Gen 2 scope series offer several compact tactical optic models that are packed with many of the popular features that are ideally suited for Tactical Shooters. With a built in M193 5.56 55gr. FMJ Bullet Drop Compensator feature, a shooter can engage targets at varying distances much easier. The centerline of the Gen 2 scope is set at the proper 1½” AR15 height for a more comfortable and natural cheek weld on an AR15 platform.
MOUNTING THE OPTIC: Figure 1 Figure 2 This Optic is equipped with a Quick Release Weaver & Picatinny type rail Mount with an auto Locking Latch. You should place your firearm on a secure platform, such as a gun vise, before performing any of the following procedures.
. Once you have properly tightened the Slotted Set Screw and checked the rail tension of the mount connection by opening and closing the Quick Release Lever, you can now tighten the Locking Hex Nut to secure the adjustments you have made. Tighten the Locking Hex Nut with the Quick release lever in the closed position for best results. Be sure not to over tighten the Locking Hex Nut to avoid stripping it. You have now successfully mounted your scope and adjusted the rail tension of the mount.
The Windage Adjustment turret is located on the right side of the scope body. This Windage Adjustment is an open Target style turret for ease of access (Fig. 5). Twisting the Windage Adjustment Counter-Clockwise will move the crosshairs to the Right, moving your bullet impacts Left. Twisting the Windage Adjustment Clockwise will move the crosshairs to the Left, moving your bullet impacts Right.
increments of 100 yards. So whatever distance you are shooting at, simply turn the BDC knob to the closest BDC range in 100 yards increments. NOTE: Since altitude, temperature, wind, rain, and other climatic conditions affect trajectory, you may experience some slight deviation in the exact settings of your scope from one shooting session to the next. Also, different cartridge batches, brands, loads, and bullet weights will result in different points of impact.
IF YOU ARE NOT SURE ABOUT ANY OF THE PROCEDURES IN THIS MANUAL, ALWAYS SEEK THE HELP OF A QUALIFIED PROFESSIONAL TO AVOID DAMAGE TO YOUR SCOPE AND YOUR FIREARM. CARE AND MAINTENANCE Your Mark III Tactical Gen 2 scope is fog proof, shock proof, and waterproof. However, you should never try to take it apart or clean it internally. The exposed optical lens surfaces will perform their best if they are routinely cleaned with a lens brush and/or the lens cloth provided with your scope.
MARK III TACTICAL SERIES GENERATION 2 FOR TECHNICAL ASSISTANCE CALL: 1-866-NcSTAR-8 (1-866-627-8278) WWW.NCSTAR.
