VISM CBT Scope Series with Integrated Red Laser Congratulations on the purchase of your new VISM CBT Scope! The CBT Series of Scopes give you many great options so you can choose the scope that best fits your needs. Backed by a Lifetime Limited Warranty, your VISM Scope will provide you with years of reliable service. This Owner’s Manual will help you understand all of the features of your new scope. Follow all instructions carefully before initial use to experience the best performance.
you must first loosen the Lock Nut Counter-Clockwise (). Once the Lock Nut is loosened or removed, you can then use an Allen wrench to turn the Allen Head Adjustment Screw. Turn the Allen Head Adjustment Screw Clockwise () to make the rail mount tension Tighter, turn the Allen Head Adjustment Screw Counter-Clockwise () to make the rail mount tension Looser. To test the rail mount tension, open and close the Quick Release Lever while mounted on the optics rail.
On the top surface of the Adjustment Dials you will notice that there are arrows indicating direction of the Reticle movement. Turning the Elevation Adjustment Dial Clockwise () will move the Reticle Up (), shifting the bullet point of impact Down ().
Bore Sighting alone is not sufficient enough to ensure and accurate Zero. You must shoot you firearm at the range in order to confirm a 100% accurate Zero. Follow these steps to fine tune your scope adjustments: 1. Secure your firearm using a steady platform such as a rifle bench rest or sand bags. 2. Fire 3 to 5 carefully aimed shots at a target that is set to your desired Zeroing distance (100 yards is recommended). 3.
To Zero your Center Beam Laser, follow these steps: 1. Secure your firearm using a steady platform such as a bench rest. 2. To turn the Laser ON, use the Rheostat Dial located on the left side of the Turret Body. The “L” position on the Rheostat Dial will turn the Only the Laser ON, and the “B” position on the Rheostat Dial for ‘Both’ will turn the Laser and Blue Reticle Illumination ON at the same time. 3.
Care and Maintenance Your VISM CBT Series Scope is shock proof, waterproof, and fog proof. However, you should never try to take it apart or clean it internally. The exposed optical lens surfaces will perform their best if they are routinely cleaned with a lens brush or a lens cloth. For a deep cleaning, you can also use high grade camera lens paper and camera lens cleaning solutions.
