Lathe User's Manual

14.3 Listing of Global Messages
Error
Code
Message Description
Canceling and Re-
pairing Method
127
1105
REFERENCE POINT t6 This message is displayed, if during refer-
ence point return in case of distance-coded
measuring system the distance between
two zero pulses is not in accordance with
the values of parameter ZERODIS.
Value of t is the name of the axis: X, Y,
Z, U, V, W, A, B, C.
In the error code (1105, 1115, 1125, ...)
the digit on local value 10 (0, 1, 2, ...) +1
is the physical axis number.
The message is can-
celed by RESET
key.
1115
1125
1135
1145
1155
1165
1175
1300
FORBIDDEN AREA t+ This message is displayed, if an externally
forbidden area has been specified by
means of command G22, and one of the
axes runs on the limit of this area in direc-
tion +, or is in the forbidden area at the
moment of specification.
Value of t is the name of the axis: X, Y,
Z, U, V, W, A, B, C.
In the error code (1300, 1301, 1302, ...)
the digit on local value 1 (0, 1, 2, ...) +1 is
the physical axis number.
The error can be can-
celed only if the axes
are moved away from
the zone limit by
means of manual
intervention. If in the
moment of selection
one of the axes is in
the forbidden area,
first the specification
must be canceled by
means of command
G23.
1301
1302
1303
1304
1305
1306
1307
1320
FORBIDDEN AREA t– This message is displayed, if an externally
forbidden area has been specified by
means of command G22, and one of the
axes runs on the limit of this area in direc-
tion –, or is in the forbidden area at the
moment of specification.
Value of t is the name of the axis: X, Y,
Z, U, V, W, A, B, C.
In the error code (1320, 1321, 1322, ...)
the digit on local value 1 (0, 1, 2, ...) +1 is
the physical axis number.
The error can be can-
celed only if the axes
are moved away from
zone limit by means
of manual interven-
tion. If in the mo-
ment of selection one
of the axes is in the
forbidden area, first
the specification
must be canceled by
means of command
G23.
1321
1322
1323
1324
1325
1326
1327