Datasheet

Series 2000
Torque Sensor
www.ncte.de
Revision K Page 1
Nov 2014
2. Model Series 2000
1. Short description
Model
Series 2000
Nominal-Torque Max. load
Speed
[rpm]
Round shaft
(Rd)
Square shaft
(Sq)
Unit bidirectional (+/-) bidirectional (+/-) Rd/Sq
Ø 9 mm ¼ Inch
[Nm] 2.5 5.0
5000/1000
[ft-lb] 1.8 3.7
[Nm] 5.0 10.0
5000/1000
[ft-lb] 3.7 7.4
[Nm] 7.5 15.0
5000/1000
[ft-lb] 5.5 11.1
[Nm] 17.5 35.0
5000/1000
[ft-lb] 12.9 25.8
Ø 14 mm ⅜ Inch
[Nm] 75.0 150.0
5000/1000
[ft-lb] 55.3 110.6
Ø 19 mm ½ Inch
[Nm] 175.0 350.0
5000/1000
[ft-lb] 129.0 258.0
[Nm] 250.0 350.0
5000/1000
[ft-lb] 184.3 258.0
Ø 25 mm ¾ Inch
[Nm] 500.0 750.0
5000/1000
[ft-lb] 368.6 552.9
The series 2000 allows an easy and cheap torque measurement for test benches and production lines. With
this torque sensor the effective torque on the gauge bar can be measured bi-directionally in real time both at
rest and in rotation.
The sensor is delivered as a complete unit with corresponding connecting cable and key stones. The torque
sensor is particularly characterized by its low price and high robustness.
Properties
 Maintenance-free operation
 High tolerable dynamic loads
 High tolerable transverse forces and bending moments
 Integrated signal conditioning
Performance
 Bi-directional measurement range from 0 to 500 Nm
 Accuracy class
1)
1
 Torque measurements up to 5000 rpm
 Analog output signal
Modifications reserved. All details describe our products in general form only. They are not to be
understood as a guarantee of quality or durability and do not constitute any liability whatsoever.