Datasheet

www.ncte.de
Revision L
Nov 2014
Torque Sensor
Series 3000 and Series 4000
Modifications reserved. All details describe our products in general form only. They are not to be
understood as a guarantee of quality or durability and do not constitute any liability whatsoever.
Page 3
4) Based on the non-contact measurement principle the torque sensor is quite insensitive to bending and shearing forces.
Self-aligning couplings are recommanded in case of dynamic loads.
EMI / EMC Unit Wert
Tested Standards
23 EN 61000-6-3: 2007 - PASSED
24 EN 55011: 2009 + A1: 2010 class B - PASSED
25 EN 61000-6-2: 2005 - PASSED
26 EN 61000-4-2 (ESD) : 2009
-
PASSED
27 EN 61000-4-3 (HF) : 2006 + A1: 2008 + A2: 2010
-
PASSED
28 EN 61000-4-4 (BURST): 2004 + A1: 2010
-
PASSED
29 EN 61000-4-5 (Surge): 2006
-
PASSED
30 EN 61000-4-6: 2009
-
PASSED
31 EN 61000-4-8: 2010
-
PASSED
32 EN 61000-4-11: 2004
-
PASSED
Load limits
4)
Unit Value
33 Maximum measurable torque % 110
34 Maximum torque, related to nominal torque % 300
35 Ultimate torque % 500
36 Maximum load of key stone (Application factor 1,5) % 180 200 200