- NDC Communications Network Card User Manual

the Host Table to a file (for convenience you could save the Host table on a
network disk for ease of access).
Import Host Table to check device’s availability
Import the Host Table from a file (for convenience you could retrieve the Host
table from a network disk for ease of access). Once the Host Table has been
imported, the IWMS will automatically check the availability of WWBs or WECs
listed on the Host Table. This is an extremely powerful feature as Auto-Discovery
can only find InstantWave’s devices when they are alive. A failed device will not
be found via Auto-Discovery. The devices listed in the Host Table should be
available and provide a service. If they do not exist, the IWMS can report their
absence immediately so that the system administrator can take immediate action.
New/Edit/Delete a Host Address on the Host Table
Click the Add New Address button to open the New/Edit Address dialog box
(Figure 33). You only need enter an IP address; the IWMS will automatically
find WWB and WEC hardware address and device types.
Figure 33. New/Edit/Delete a Host Address
InstantWave 11Mbps WWB/WEC
51