Technical Specifications

ECONOMY SERIES TSE SERIES
Kbi TSE provides maximum flexibility and protection for sprinkler
heads with minimal cost. Allows sprinkler height and angle to be
adjusted. Flexible design adds protection to lateral pipe against
damage. Retrofit model adds extra inlet elbow to retrofit riser
on either horizontal or vertical elbow.
• Factory preassembled.
• Permanent and economical.
• Limited Lifetime Warranty.
• Full 3 way adjustable including height.
• 70 psi @ 73˚ working pressure rating.
• Made of quality acetyl and polyethylene construction.
• 1/2” and 3/4” sizes available in both 6” and 12” lie-length.
• Manufactured in the U.S.A. by
Kbi .
• Lie lengths 6” or 12” as shown.
8
Retrofit Standard
Kbi TSE Under Sprinkler Head Kbi TSE Under Side Inlet Spray Head
PVC LATERAL
SPRAY POP-UP
TRIPLE SWING ASSEMBLY
SET AT APPROX. 45˚ ANGLE
TO PVC
PVC TEE
FINISH GRADE
Y
L
B
M
ESS
A
GN
IW
S
E
L
PI
R
T
SPRAY POP-UP
FINISH GRADE
PVC LATERAL
TRIPLE SWING ASSEMBLY
SET AT APPROX. 45˚ ANGLE
TO PVC LATERAL
PVC TEE
Y
L
B
M
E
SSA
G
N
I
W
S
E
LP
I
R
T
TSE Available Part Numbers
Size Length Standard Retrofit
1/2” 6” TSE-0500-6 TSE-0500-6R
1/2” 12” TSE-0500-12 TSE-0500-12R
3/4” x 6” 6” TSE-0750-6 TSE-0750-6R
3/4” x 12” 12” TSE-0750-12 TSE-0750-12R
1/2” x 3/4” x 6” 6” TSE-0507-6 N/A
1/2” x 3/4” x 12” 12” TSE-0507-12 N/A
Typical TSE Installations: