Instructions / Assembly

Assembly Instruction
1. Hook up every section alphabetically by using the 2 screws attached at every one of them
2. If it is pre-lit wreath, please refer to the information below while plugging in.
2-piece: Plug B into A's end-connector, or plug both A and B into the power source.
4-piece: Plug B into A's end-connector, plug C into D's end-connector, then plug A&D into power source.
6-piece: Plug C into B's end-connector, plug B into A's end-connector. Plug D into E's end-connector, plug
E into F's end-connector. The final step, plug A&F into power source.
8-piece: Plug D into C's end-connector, plug C into B's end-connector, plug B into A's end-connector. Plug
E into F's end-connector, plug F into G's end-connector, plug G into H's end-connector. The final
step, plug A&H into power source.
3. Make sure every section is tightened securely.
Suggestion: Unlock every part and put away in the carton when not in use.
(4-piece wreath illustration)
This image may be different from the product's size you bought.
4-piece wreath illustration: