Owner's Manual

EN
12
13
EN
[Auto Keystone
Correction]
Enable / disable auto
keystone correction.
[Keystone Correction]
Correct keystone manually.
Default value is 0.
[Projector mode]
[Front]: The device is located
in front of the projection
surface.
[ Rear]: The device is located
behind the projection surface.
[Front Ceiling]: The device
is hanging from the ceiling
in an upside down position.
The image is rotated by 180
degrees.
[Rear Ceiling]: The device
is hanging from the ceiling
in an upside down position
behind the projection
surface. The image is
rotated by 180 degrees and
horizontal mirrored.
4. App Manager
①
Press to access the home menu, select
[Settings] > [App Manager] and press .
②
Select an app and check the current version, open
or force stop, check the storage used or clear data, or
uninstall it.
T
When more than 3 apps are installed, you can
select [All] at the bottom line of the home page
to enter the [Apps] page. Select an app and
press
in the remote control, and then you
can select [Move To Home] or [Uninstall].
5. Other
Press to access the home menu, select [Settings]
nd more settings.
[General]
[Language]
Select an on-screen display
language.
[Keypad Tone] Turn on / off the keypad tone.
[Automatic Sleep
Interval]
5 min / 15 min / 30 min
[Background] Select a background.
[Date&Time]
[Automatic
Date&Time]
Enable / disable automatic date
and time.
[Date] Manually set date.
[Time] Manually set time.
[Select time zone] Select time zone.
[Use 24-hour
format]
Select 24-hour format or 12-hour
format.
[Upgrade]
[Check Update]
Check if it is the latest version.
Follow the on-screen instructions
to upgrade the software version.
[About]
[Recovery]
All data on the built-in storage
will be erased.
51005000960_D4111_Manual_60X110mm_20181218-V01.indd 12-13 2018\12\18 星期二 15:48:59