User's Manual Part 2

INSTALLATION ROI-S05750
2-30
Chart 2-6 (Cont’d)
Step Procedure
CHANGE OF POLARIZATION OF THE HYB
NEC HYBRID
Note:The hybrid is set to V-polarization when shipped from the factory.
1 If you change the polarization from V to H, loosen two screws,
rotate the transition hub and put it to the HYB.
1Note: There are two types NEC HYBRID. One uses two pieces
transition hubs and another uses one piece.
2 Then fix it with the two screws that were loosened in step 1.
TRANSITION
HUB
V POLARIZATION
GUIDE PIN
HYB
V POLARIZATION
H POLARIZATION
Two Pieces Transition Hub Type
H POLARIZATION
V POLARIZATION
One Piece Transition Hub Type
(Only for 13/15/18/23 GHz HYBRID)
M2.6(2ea)
Cross- Recessed
Head Machine Screw
Cross-Recessed
Head Machine Screw
M2.6 (2ea)