User's Manual Part 2

INSTALLATION ROI-S05750
2-70
Chart 2-13 (Cont’d)
Step Procedure
4. Connect the Coaxial cable to
the RF IN/OUT connector
of the ODU,
5. Down the cable fix bracket
to fix the Coaxial cable, then
tighten the two bolts,
6. Install the Coaxial cables
between the antenna and
ODU.
Note: Fix the coaxial cable to the pole or
member with cable hanger or cable
ties after antenna orientation has
been completed.
Caution: Wrap the coaxial cable
connection points with a self-
bonding tape for waterproof.
6/7/8 GHz ODU MOUNTING (Connecting Coaxial Cable)
COAXIAL
CABLE
ODU
BRACKET
TIGHTEN BOLTS (M5)
POLE
ODU
COAXIAL
CABLE
Tightening torque: 3.0 N·m± 10%
O-Ring
ANTENNA
Washer
Spring Washer
Bolt (M4)
Transducer
Note: Tightening torque is 1.4 N·m ± 10%.
Nut
(When the wave guide flange is
provided to the antenna port, fit
the transducer with eight bolts.)