User's Manual Part 2

ROI-S05750 INSTALLATION
2-75
Chart 2-14 Terminating Supervisory Cables with D-Sub
Connector
Step Procedure
1 Strip back the cable sheath, taking care not to damage the
braided shield.
50 mm
CABLE
Note: Use shielded cables which are connected to the D-Sub
connector to suppress interference from affecting the
signal and to reduce electromagnetic radiation which may
interfere with other signal cables.
2 Fold back the braided shield (do not separate the strands) and
trim it as shown.
WIRE
3 Remove 4 mm of insulation from the end of the wire.
CONFORMABLE
WIRE SOCKET CONTACT
AWG#20-24 :CD-PC-111
AWG#24-28 :CD-PC-121
WIRE
4 mm