User's Manual Part 3

INSTALLATION ROI-S05750
2-96
Chart 2-19 (Cont’d)
Step Procedure
7 Connector body is fit to the cable.
Fit in the cable end into the body
and screw the clamp nut by
your hand first and tighten it with a torque wrench.
Confirm the space that it is less than 0. 5 mm between the body
and the cramp nut.
BODY
CLAMP NUT
18/2 flats
less than 0.5 mm
Tightening torque is more than 9.8 N•m (100kgf•cm)
Note: Use torque wrench.