User's Manual Part 4

Introduction ROI-S05752
-14-
Notes: Item (*1) is displayed in APS configuration only.
Item (*2) is displayed in XPIC configuration only.
Note: Item (*1) is displayed in Main LAN configuration only.
Click on the corresponding item in status block, following
details LAN PORT status in the LAN/WS INTFC appears.
Link: Displaying LINK status for respective Port.
Collision: Displaying occurrence of Collision status in Half Duplex mode for respective
Port.
LLF: Forced LINK off control status
detecting the link loss of the facing
equipment
for respective Port.
Speed &Duplex:Displaying linked mode for respective Port.
---CTRL---
Item Status
CTRL Module Normal
MMC Mount Not Mounted
APS SW Fail Normal (*1)
APS Online Status Working (*1)
APS Lock in Status Normal (*1)
XCTRL Normal (*2)
XPIC Mode Mismatch Normal (*2)
---INTFC (Main) (1)---
Item Status
Main
Unequipped Normal
Type Mismatch Normal
Module Normal
LOS(MUX) Normal
LOF(MUX) Normal
E-BER(MUX) Normal
SD(MUX) Normal
LOS(DMR) Normal
LOF(DMR) Normal
E-BER(DMR) Normal
SD(DMR) Normal
LAN LINK Normal (*1)
Speed & Duplex Normal (*1)
Inphase Inphase
TF Normal
Output Control Normal
Item Status
Link Collision LLF Speed&Duplex
Main PORT1 Link Normal Normal 10M-Half(MDI)
Main PORT2 Link Normal Normal 10M-Half(MDIX)
Close