User's Manual Part 5

CORRECTIVE MAINTENANCE ROI-S05751

5-44

Chart 5-4 (Cont’d)

Step Procedure

6 When the MAINT LED blinks, insert the MMC into the MMC

slot on the CTRL front, which has equipment configuration data

used in the former CTRL,

7 The download of the equipment configuration data start, the

ployment is performed. When the CTRL has been made

provision, MAINT LED on the IDU turns to light. Check that

the MAINT LED lights and set the PROTECT SW to OFF

position (for lower side). Then, the equipment configuration

data deploys and data is restored.

8 In the Equipment Setup menu and the Provisioning menu,

confirm that the equipment configurati

on and setting conditions

are the same as before replacement. Check that neither alarm is

indicated in the Alarm Status.

9 The CTRL replacement finishes. Perform the resetup for the

Network

Config. since the Network Config. data is not restored.

AUX/ALM

LCT NMS

SC IN/OUT

EOW

PROTECT

CALL

MMC

MAINT

MEMORY

IDU

PASOLINK NEO

MAINTE LED

MMC Slot

MPROTECT SW

CTRL

MMC

SCREW