User's Manual Part 5

CORRECTIVE MAINTENANCE ROI-S05751
5-50
Chart 5-4 (Cont’d)
Step Procedure
7 Form the wiring, and fix the cables using cable binder to the
mounting rack,
Notes: 1. Do not cross the cables o
n front of indicators and power
switch used for maintenance.
2. Take suitable radius to wiring the IF cable. (e.g. 10D-
FB: 70 cm)
8 Turn on the power switch on the IDU.
SCREW
Note: Weight 4 kg.
Hot Surface
Caution: The top surface of the IDU above
MODEM is hot in operation.
Fig. 5-9 Demounting and Remounting
FRONT
POSITION
CENTER
POSITION
SIDE VIEW
Fig. 5-10 Bracket Mounting Position