User's Manual

32
iPasolink250 Installation and Commissioning Guide Document ID: 141-DOC000008-E
Handling Package
Identify the top face of the container, (identifiable by packing labels) and keep the top face
uppermost at all times. The package contents are to be considered fragile at all times. Apply
sufficient water-proofing if packages are to be handled in wet weather conditions.
Verifying Shipment
The network element and the corresponding accessories are delivered in two different cartons.
Compare the package list information with the alphanumeric information provided on the
shipping labels. The package list and shipping labels should contain the same information. If any
discrepancies found between the shipping label information and the package list information,
contact the Technical Support Center.
Storing Packages
Follow the below instructions when storing the packages:
 Unpack the network element only during installation.
 Preserve the packaging materials (after unpacking the network element) for future use.
 If the network element is damaged during shipment, preserve as much of the packaging as
possible to allow customer service and the shipper to analyze the damage. To report damage
shipped articles, contact the Technical Support Center to open a Return Materials
Authorization (RMA).
Unpacking the Network Element
Before unpacking the iPasolink network element, make sure that you have the following tools:
 Sharp pointed blade or knife
 Conductive bonded wrist strap
To unpack the system:
1. Place the packing box in the direction as per shown in the warning logo sticker pasted on the
packing box. Figure below shows warning logo.