User's Manual

60
iPasolink250 Installation and Commissioning Guide Document ID: 141-DOC000008-E
NOTE: The remote server should have an FTP server installed on it to carry out the Restore
configuration data command. For a Linux system, FTP server is inbuilt. For Windows system,
install any third party server such as 3com server along with the provided IIS server.
The following table describes the Restore Configuration Parameters
Parameter
Default Value
Description
Configuration Operation
Restore Configuration
from Remote Machine
Parameter to select if the configuration is to be
backed up from Remote machine or local
machine.
Restore Configuration from Remote Machine:
Configuration is backed up from remote
machine.
Restore Configuration from Local Machine:
Configuration is backed up from local machine.
User Name
:
The user name of the system where the backup
configuration is present.
Password
-
The password of the system on which the
backup is present.
IP Address
-
The IP address of the system where the backup
is present.
FTP Port (optional)
-
The FTP port number for establishing
connection with system having the
configuration backup.
Directory
-
The Directory in which backup configuration
file is present.
NOTE: Cold reboot the shelf after committing the configuration. The Node Configuration
state is displayed at the bottom of the preview pane.
CAUTION: The restoration of configuration data of a network element is service
disruptive. The new configuration data requires backup. Restoration could be done from a
system which has an FTP server.