User's Manual

81
Appendix III General Procedures
2. Pull the carrier handle to disengage the FAN-A from the backplane connector.
3. Slide the FAN-A along the guide way till it comes out of the slot. Figure below shows FAN-
A uninstalled from the chassis.
Inserting and Ejecting Air Filter Unit
To insert a fan tray in a network element:
1. Identify the correct slot for the Air Filter Unit.
2. Slide the Air Filter Unit with carrier along the guide ways provided on the chassis.
Figure 31: Uninstalling FAN-A from the Chassis
Figure 32: Installing Air Filter Tray Unit (I)