User's Manual

NOTE: THE NEC iPASOLINK 5.8 GHz RADIOS MUST BE

PROFESSIONALLY INSTALLED AND ARE THEREFORE EXEMPT FROM

THE ANTENNA RESTRICTIONS (FCC PART 15.203).

NOTE: THE NEC iPASOLINK 5.8 GHz RADIOS USE QAM MODULATED

SIGNALS AND IT IS CERTIFIED FOR OPERATION UNDER PART 15.247

OF THE FCC REGULATIONS. THE NEC iPASOLINK 5.8 GHz RADIO IS

DESIGNED TO OPERATE IN A POINT-TO-POINT COMMUNICATIONS

LINK USING THE 5.725 – 5.850 GHz BAND. THE RADIO WILL PROVIDE A

TRAFFIC CAPACITY OF 155 MBP/S USING 128 OR 256 QAM

MODULATION. THE NEC iPASOLINK 5.8 GHz RADIOS ARE NOT

DESIGNED TO BE INSTALLED OR USED BY THE GENERAL PUBLIC,

THE INSTALLATION REQUIREMENTS ARE SUCH THAT CONSUMERS

OR BUSINESS PERSONS DO NOT HAVE THE TECHNICAL SKILLS TO

PROPERLY INSTALL AND COMMISION THE iPASOLINK RADIO.

NOTE: THE NEC iPASOLINK 5.8 GHz RADIO WILL BE SOLD NY NEC

CORPORATION OF AMERICA AND IT’S SALESPERSONS OR

AUTHORIZED AGENTS ONLY, AND WILL BE INSTALLED BY TRAINED

PROFESSIONAL PERSONNEL.

NOTE: THE NEC iPASOLINK 5.8 GHz RADIOS WILL BE USED FOR

FIXED POINT TO POINT APPLICATIONS. THE iPASOLINK RADIO

UTILIZES A PARABOLIC ANTENNA THAT REQUIRES PROFESSIONAL

INSTALLERS FOR PATH ALIGNMENT.

WARNING: THE MAXIMUM RF TRANSMIT POWER OF THE NEC

iPASOLINK 5.8 GHz RADIO IS 1.0 WATT (+30.0 dBm). THE TECHNICIAN

CAN SET THE OUTPUT POWER FROM +10 dBm TO +30 dBm DURING

INSTALLATION. THE METHOD OF ADJUSTING THE OUTPUT POWER

IS DESCRIBED IN SECTION III OF THE INSTALLATION MANUAL AND

REQUIRES THE USE OF A LAPTOP COMPUTER. THE NEC iPASOLINK

5.8 GHz RADIO IS SOLD WITHOUT ANTENNAS AND SUPPORTING

HARDWARE.