User's Manual
19
Continued on next page
Voice/Videophone Calls
■ To mute the ring tone
XPress g at “Level 1”
The icon on the standby screen indicates which
items are set to “Silent”.
: “Silent” is set for “FOMAphone”,
“WLANphone(Public)”,
“WLANphone(Extension)”, and/or
“Videophone”
: “Silent” is set for “Mail”, “MessageR” and/or
“MessageF”
: Both “ ” and “ ” are set
Holding Incoming/Current
Calls
<On hold/Holding>
<Example: To put an incoming call on hold>
1
While ringingXy
Three short beeps sound
and the call is put on hold.
The caller hears an
announcement that you
cannot answer now, and the
call is put on hold.
■ To put the current call
on hold
XDuring a callXt
■ To end the call during on hold/call hold
Xy
2
Press r to resume the call
You can also press t to resume the held call.
Setting the hold tone
<Hold tone setting>
Set the announcement to be played to the caller
during on hold.
1
[MENU]X“Settings/NW Service”X
“Talk”X“Hold tone setting”X“On
hold tone”XSelect a tone
Select “Tone 1”, “Tone 2”, “Voice announce 1
*
” or
“Voice announce 2
*
”.
*: Not available when no voice announcement is
recorded.
Using Public Mode
Public mode (Driving mode/Power OFF) is an
automatic answering service provided for public
places and circumstances in which mobile phones
should not be used.
z When Public mode and network services are set
concurrently, Voice Mail service
*1
, Call Forwarding
service
*1
and Caller ID Request service
*2
take
precedence over Public mode.
*1 : For a voice call whose ring time is not “0 second”, a
service activates after the Public mode
announcement is played.
*2 : When the caller notifies the caller ID, Public mode
activates.
z Public mode does not work for a call from a phone
number registered for Nuisance Call Blocking.
Using Public Mode (Driving Mode)
<Public mode (Driving mode)>
When Public mode is set, a caller hears a message
that you cannot answer the call because you are
driving or in a place where you have to refrain from
using a mobile phone (on a train or bus, in a theater,
etc.), then the call ends.
z Public mode can only be set or released from the
standby screen (can also be set or released when
“ ” is displayed.).
z You can make calls when Public mode is set.
z This function is not available during data
communication.
z When you receive a call with no caller ID while
Caller ID Request service is set to “Activate”, the
caller ID request announcement is played (Public
mode announcement is not played.)
N
z The ring volume setting specified for
“FOMAphone” in this function is also applied to
the “Select ring tone” setting for a FOMA voice
call, and the alarm tones for “Schedule” and “To
Do list”.
z Even if the Ring volume is set to “Level 3” - “Level
6” or “Step”, the ring tone is played at “Level 2” in
the following cases:
• Immediately after a voice call/videophone call
ends
• Immediately after Record message/Voice memo
recording ends or during playback
• Immediately after “Voice announce” or VP
memo recording ends
N
z Call charges apply while an incoming call or
current call is put on hold.
REA_Tel.fm 19 ページ 2009年7月31日 金曜日 午後10時4分