User's Manual
199
G’zGEAR
®
Walking Counter
You can count the number of steps you traveled with the Walking
Counter tool.
NOTES
sThe pedometer counts your steps while the phone power is on. You
do not need to open G’zGEAR to count your steps.
sThe counter is reset everyday at midnight.
sThe pedometer detects the small vibrations generated when you
are walking or jogging and counts them as steps. The error of the
count increases if your steps cannot be detected normally or if
vibration other than from walking or jogging is detected.
sThe steps counted by the pedometer may differ from the actual
number of your steps. Use the counted result only as a guide.
sThe length between points as displayed in Virtual Trek mode is not
accurately scaled to the actual real-world distance between points.
Virtual Trek mode
In Virtual Trek mode, you can virtually hike along famous trails on the
seven continents. The distance you hiked on the trail is calculated
based on the number of steps counted by the pedometer.
1. On the G’zGEAR Home menu screen, touch Walking Counter.
2. If necessary, touch either of the switch mode icons to switch to
Virtual Trek mode.
The Virtual Trek screen displays your distance hiked, current position
on the trail, the percentage of the trail you have hiked, and trail
milestones.
sTouch and hold the screen or touch the Menu key
to access the
following options:
Trek selection: Allows you to select the trail to walk from the list.
Delete trek walking data: Deletes trail’s walking data.
Body Settings: Allows you to enter your height, weight, age,