User's Manual

239
Settings
sTouch Menu key > Scan on the Wi-Fi settings screen to manually
scan for networks.
sIn addition to the settings described in this section, you can touch the
Menu key
on the Wi-Fi settings screen and touch Advanced to
configure the settings described in “Advanced Wi-Fi settings screen”
on page 273.
Advanced Wi-Fi settings screen
Wi-Fi sleep policy: Opens a dialog where you can set whether and
when the Wi-Fi radio disconnects. Disabling sleep uses more battery
power.
MAC address: The Media Access Control (MAC) address of your
phone when connecting to Wi-Fi networks.
IP settings: If you check Use static IP, you can use IP settings to
enter an IP address and other network settings for your phone manually,
rather than using the DHCP protocol to obtain network settings from the
Wi-Fi network itself.
Bluetooth settings screen
For details about working with these settings, see “Connecting to
Bluetooth
®
devices” on page 128.
Bluetooth: Check to turn on Bluetooth so you can connect to
Bluetooth devices.
Device name: Opens a dialog where you can give your phone a name
that is visible on some Bluetooth devices when you pair them. The
current name is displayed.
Discoverable: Check to make your phone discoverable by other
Bluetooth devices for 60 seconds.
Scan for devices: Touch to search for and display information about
nearby Bluetooth devices.