HIY02 User Manual
Introduction Thank you for purchasing the HIY02. Before using your cell phone, be sure to read the Basic Manual (this PDF manual) to ensure correct usage. After you have finished reading this manual, store this PDF manual and the printed manuals in safe places so you can retrieve them whenever you need them. Manuals for the HIY02 The HIY02 comes with the Instruction Manual. ● For learning the basics: Read the Basic Manual (this manual).
Illustrations and Screenshots in This Manual ■ Note on Illustrations The illustrations in this manual may look different from the actual cell phone in shape, color and typeface. The key illustrations are also simplified as shown below. Key Illustration ⑤ ① ② ③ ⑥ ④ & ⑦ R ② L ⑧ C ⑨ F ③ ⑦ ⑧ ⑨ Key Illustration ① ⑩ ④ 123 456 789 *0# ⑩ ⑪ ⑤ cjs ⑪ ⑥ % ( ■ Note on Screenshots The screenshots in this manual are simplified and may look different from the actual cell phone screens.
Notes on Cell Phone Use Cell Phone Etiquette The cell phone always emits weak radio waves when power is on. Use the cell phone in an enjoyable and safe manner without forgetting to be considerate of others around you. ● Use of cell phones is not allowed in some places. • Do not use the cell phone while you are driving. Doing so is both dangerous and prohibited by law. • Using a cell phone in an aircraft is prohibited by law. Be sure to turn the cell phone off.
Disaster Message Board Service When a big scale disaster occurs, you can register your safety information from EZweb. The registered information can be referred from anywhere in Japan from EZweb or Internet. Registering safety information Inquiring for safety information Access • When a big scale disaster occurs, from an au phone, you can register your safety information (i.e. your condition and comments) to the 災害用伝言板 (Disaster Message Board) created on the EZweb.
Making and Answering Calls Contents Introduction Illustrations and Screenshots in This Manual 1 Notes on Cell Phone Use 2 Cell Phone Etiquette …………………………………… 2 Do Not Use the Cell Phone While Driving!…………… 2 Disaster Message Board Service …………………… 3 Contents 4 Getting Ready 6 Checking the Contents of the Box …………………… Names of Parts ………………………………………… Charging the Battery Pack …………………………… Learning the Basics …………………………………… Turning On Power ……………………………………… Switching the Display Language to English ………
Mail Using E-mail …………………………………………… Creating and Sending E-mail Messages …………… Reading Received E-mail Messages ………………… Reading an E-mail Message with an Attached Photo or Movie ……………………… Replying to Received E-mail Messages ……………… Rejecting Spam ………………………………………… Using C-mail …………………………………………… Creating and Sending C-mail Messages …………… Reading Received C-mail Messages ………………… Camera 25 25 25 26 26 26 27 28 28 28 29 Taking a Photo ………………………………………… 29 Viewing Photos ………………………………………… 29 EZweb Accessing Si
Getting Ready Checking the Contents of the Box The box contains the cell phone and accessories. • Cell phone • Battery pack • Instruction Manual (Japanese) • Warranty (Japanese) • Safety Precautions (Japanese) • The following accessories are not included. - microSD memory card - Desktop holder - USB cable - Earphone jack conversion adapter Purchase a specified AC adapter (sold separately).
Names of Parts ■ From the Front ■ From the Back ■ From the Sides Earpiece Optical sensor FeliCa mark Display External connection jack cover LED Display Cursor key Address book key Mail key Answer key Number keys Photo light/ Pocket light Microphone Built-in antenna Center key Camera lens Application key Camera EZ key start indicator Clear/Memo key End/Power key Charging terminals Incoming indicator (LED) Built-in TV antenna External connection jack Speaker Infrared port Manner key Strap eyelet
Charging the Battery Pack The battery pack is not fully charged at the time of purchase. Be sure to charge the battery pack before using the cell phone for the first time. • An AC adapter is not included. Purchase a specified AC adapter (sold separately). ➡ Confirm that the charge indicator lights. • Charging: A charge beginning sounds and the charge indicator lights. • Charging finished: A charge completion sounds and the charge indicator goes out.
Learning the Basics ■ Key Assignments l : Display Incoming History. d : Display Alert window/Shortcut menu. & : Use Phone Book. u : Display the ticker field, info pane and gadget (setting) icon. r : Display Outgoing History. c : Display Main menu. % : Activate EZapps. L : Send/receive e-mail/c-mail. R : Display EZ Service menu. : Make/answer calls. C : Set/cancel Answer memo. Delete characters. Cancel operation. F : Turn power on/off. End call/communication. Cancel operation.
■ Hiding/Redisplaying the Alert Window When the alert window is displayed on the standby screen, you can temporarily hide it by pressing & (Back) and then display the Main menu by pressing c. To redisplay the hidden alert window, press d when the standby screen is displayed. Turning On Power Hold down F for at least a few seconds. • You cannot receive or make calls if out of range indicator is displayed. ■ Turning Off Power When the standby screen is displayed, hold down F for at least one second.
Display Indicators Display indicators inform you of mail arrival, current settings, etc.
Changing Your E-mail Address You can change the account name of your e-mail address. E-mail address △△△@ezweb.ne.jp Account name Domain name ➡ Use j to select 承諾する (Accept) and then press c (Select). ➡ Use j to select the entry box, press c (Input), enter an e-mail address using single-byte alphanumeric characters, and then press c (OK). • For details on entering e-mail addresses, see page 21. When the standby screen is displayed, press L. ➡ Use j to select 送信 (Send) and then press c (Select).
Security Code and Passwords You can use a security code and other passwords described below. Take care not to forget your security code and passwords, because they are required for performing various operations and using subscription services.
Making and Answering Calls Making a Call When the standby screen is displayed, use 0 to 9 to enter a phone number. • When calling to a fixed-line phone, you also need to enter the area code. ➡ Press . • To end the call, press F. • After you enter a phone number, you can add 184 or 186 to the phone number as follows: ➡ Press (Call). to select Add Special No. and then press ➡ Use (OK). ➡ Use to select 184 or 186 and then press (Add). 184: When you do not want to inform the other party of your phone number.
Answering a Call To answer a call, press Returning a Call (Outgoing History/ Incoming History) . • To end the call, press F. ■ Display When a Call is Received The phone number of the caller appears. If the caller's phone number and name are in the phone book, the name is also displayed. When the phone number of the caller is not displayed, one of the following indicators may appear. Example: Returning a call to a phone number in the incoming history When the standby screen is displayed, press l.
■ One-ring Indicator One-ring indicator on the Incoming History screen indicates you have received a one-ring call (a call rang for three seconds or shorter). Be careful when you return a call to an unknown caller. Adjusting the Earpiece Volume during a Call During a call, use j. • Even in manner mode, the cell phone still emits a sound when autofocusing, a shutter sound when you take a photo. Changing the Incoming Ring Tone When the standby screen is displayed, press c.
Adjusting the Incoming Ring Tone Volume When the standby screen is displayed, press c. ➡ Use a to select Function and then press c (Select). ➡ Use j to select Sound/Vib/Lamp and then press c (Select). ➡ Use j to select Incoming Setup and then press c (Select). ➡ Use j to select Incoming Call and then press c (Select). ➡ Use j to select (Ringtone Volume) and then press c (Select). ➡ Use j to adjust the volume and then press c (Set). • Each press of j changes the volume one step.
■ Deleting a Message When the standby screen is displayed, press C. ➡ Use j to select Answer Memo and then press c (Select). ➡ Use j to select Answer Memo List and then press c (Select). ➡ Use j to select the message you want to delete and then press % (SubMenu). ➡ Use j to select Delete and then press c (OK). ➡ Use j to select Delete One and then press c (OK). ➡ Use j to select YES and then press c (OK).
Global Functions You can use your cell phone overseas in the area supporting Global Passport CDMA without any special applications. Setting Area When the standby screen is displayed, press c. ➡ Use a to select Accessories and then press c (Select). ➡ Use j to select GLOBAL Function, press c (Select) and then press c (OK). ➡ Use j to select Call to Japan and then press c (OK). ➡ Press c (Call). • At the time of purchase, the service area information (PRL: Roaming area information) is set.
Character Input Character Entry Modes Number of Times to Press the Key Key 1 2 3 4 5 6 7 1 ． ＠ − ＿ ／ ： 〜 When a character entry screen is displayed, you can select a character entry mode if you press & (Char.Type).
■ Entering Two or More Characters Assigned to the Same Key After you enter the first character, press r and then enter the next character. ■ Deleting Characters To delete one character at a time, move the cursor to the character you want to delete and then press C. To delete all characters to the right of the cursor, hold down C for at least one second. If there are no characters to the right of the cursor, holding down C will delete all the characters. ■ Starting a New Line Press #.
➡ Press % (SubMenu). ➡ Use j to select Phrase and then press c (OK). ➡ Use % (Category) to select Internet. ➡ Use j to select .co.jp and then press c (Select). ".co.jp" is entered. Entering Pictograms When a character entry screen is displayed, press R. ➡ Use a to select the pictogram you want to enter and then press c (Select). • You can enter pictograms consecutively if you press & (Repeat) instead of c (Select).
Phone Book Saving a Phone Book Entry When the standby screen is displayed, hold down & for at least one second. ➡ Use j to select [Name] and then press c (Select). ➡ Enter a name and then press c (OK). The [Reading] for the name is entered automatically. ➡ Use j to select [Phone No.1] and then press c (Select). ➡ Enter a phone number and then press c (OK). • If the phone number is for a fixed-line phone, enter the phone number starting with the area code.
Saving a Phone Number from the Incoming or Outgoing History Example: Saving a phone number from the incoming history to the phone book When the standby screen is displayed, press l and use j to select the phone number you want to save. ➡ Press % (SubMenu). ➡ Use j to select Reg to Adrs Book and then press c (OK). ➡ Use j to select Register New and then press c (Select). ➡ Use j to select a phone number type and then press c (Select). • For details on saving a phone book entry, see page 23.
Mail Using E-mail To use e-mail, you need to apply for an EZweb subscription. If you did not apply for an EZweb subscription at the time of purchase, contact an au shop or the au Customer Service Center. Also, before use, you need to configure initial settings. You can send and receive e-mail with other cell phones that support e-mail, and with PCs. In addition to text messages of up to 5,000 double-byte (or 10,000 singlebyte) characters, you can also send photos and movies by e-mail.
Reading Received E-mail Messages ➡ Use j to select the file name and then press c (Receive). When you receive an e-mail message, E-mail appears on the standby screen. ➡ Press c (Play). ➡ Use s to select E-mail and then press c (Select). • Selecting the file name or pressing (Receive) may be unnecessary for some files to be displayed, depending on the file size. ➡ Press c (Select). ➡ Use j to select the new message and then press c (Select).
Rejecting Spam Setting mail filters to reject spam is recommended. The サポート設定 (Supportive Settings) helps you to set mail filters easily by answering questions that appear on the screen. ■ Setting Mail Filters Example: Connecting to サポート設定 (Supportive Settings) When the standby screen is displayed, press L. ➡ Use j to select E-mail Setup and then press c (Select). ➡ Use j to select Mail Filter and then press c (Select). ➡ Use j to select 次へ (Next) and then press c (Select).
Using C-mail C-mail is a service that uses phone numbers as addresses to exchange messages between au cell phones that support c-mail. A c-mail message can contain up to 50 double-byte (or 100 single-byte) characters. ➡ Use a to select a phone book entry and then press c (Detail). ➡ Use j to select a phone number and then press c (Select). ➡ Press & (Send). • The c-mail send charge applies when sending c-mail.
Viewing Photos Camera Your cell phone can take photos and movies. Shot images can be used for the standby screen, and attached to e-mail messages. Taking a Photo When the standby screen is displayed, press c. ➡ Use a to select Camera and then press c (Select). ➡ Use j to select Photo (W.paper Mode) and then press c (Select). When the standby screen is displayed, press c. ➡ Use a to select Data Folder and then press c (Select). ➡ Use j to select Photo Folder and then press c (Select).
EZweb EZweb Subscription Required EZweb is an information service that allows you to enjoy browsing the Internet on your cell phone. You can also download Chaku-Uta-Full®, Chaku-Uta®, news, and other contents from web pages. To use EZweb, you need to apply for an EZweb subscription. If you did not apply for an EZweb subscription at the time of purchase, contact an au shop or the au Customer Service Center. Also, before use, you need to configure initial settings.
Accessing Sites ■ Viewing the au one Top You can access EZweb from the au one Top. A variety of useful and fun sites are available on EZweb. When the standby screen is displayed, press R, use j to select Top Menu/Seach and then press c (Select). au one Top キーワード検索機能 (Search by Keyword) Provides a search function for searching for information by keyword. 集まる (Community) Provides interesting and useful information that you can use for SNS or blogs.
■ Basic Operations Use j to select the site you want to access and then press c (OK). Press L or C to return to the previous screen. Hold down either key for at least one second to return to the au one Top. The following describes the basic operations that are available while accessing sites. Key Operation F Description Exits EZweb. j Moves the cursor up and down. When there is data available above or below the current screen, scrolls up and down the screen one line at a time.
Checking Charges When the standby screen is displayed, press c. ➡ Use a to select Function and then press c (Select). ➡ Use j to select Time/Toll/Sub and then press c (Select). ➡ Use j to select Inquire Toll and then press c (Select). ➡ Use j to select YES and then press c (OK). • Select the item you want to check and then follow the on-screen instructions. Downloading Chaku-Uta-Full®/ Chaku-Uta® ➡ Use j to select the site you want to access and then press c (Select). The download instructions appear.
EZ Navi EZweb Subscription Required Using GPS (Global Positioning System), EZ Navi provides useful positional information services. When the standby screen is displayed, press R and then use s to select the EZnavi. • The packet communication charges for using EZ Navi services apply to the amount of data sent and received. Some services may require a separate information fee. • Before using EZ Navi, you must configure initial settings of EZweb (page 10).
EZ Navi Walk for When You Go Out ■ フルモード (Full mode) Function Explanation トータルナビ／地図 (Total Navigation/Map) Navigate optimum route from various transportation means such as train/aircraft/bus/taxi. See current position and map of wherever you like. 乗換／時刻表(Connection/Timetable) Search for train connections, timetables and railway information. お店／施設／イベント (Shop/Facility/Event) Search for shops, facilities and event information.
Bluetooth Registering Bluetooth® Devices When connecting from your cell phone to Bluetooth® devices, you need to register the Bluetooth® device you want to connect beforehand. You do not need to operate this procedure to connect to an already registered device. When the standby screen is displayed, press c. ➡ Use a to select Bluetooth/IrComm and then press c (Select). ➡ Use j to select Bluetooth and then press c (Select). ➡ Use jto select New and then press c (Select).
USB Connection Connecting to PCs After installing the "USB driver," follow the steps below to connect your cell phone and the PC by the USB cable (sold separately). Connect the USB cable (sold separately) to the USB port of the PC. ➡ Turn on your cell phone and display the standby screen. ➡ Connect the USB cable (sold separately) to the external connection jack of your cell phone. When all connection is completed, the PC will automatically recognize your cell phone.
In Case of Loss of Your Cell Phone ➡ Use j to select Direct Input, press c (OK), enter a phone number, and then press c (OK). The Remote Ctrl Lock allows you to remotely activate the Auto Lock, FeliCa Lock, and Address Book Lock, preventing others from using your cell phone. ➡ Press % (Comp). Setting Conditions for Activating the Remote Ctrl Lock ➡ Enter a time and then press c (Set).
Activating the Remote Ctrl Lock by the Security Lock Service • You must fill out an application to use au Customer Support (the application can be filled out even after your cell phone is lost). Even if the Remote Ctrl Lock is not set in advance, the Remote Ctrl Lock can be activated by calling au Customer Service Center or completing the application process on au Customer Support from a PC. The Security Lock Service is available free of charge.
Troubleshooting Symptom Possible Cause Remedy Page ● Is the battery pack charged? Charge the battery pack. 8 ● Did you hold down F for at least a few seconds? Hold down F for at least a few seconds. 10 ● Is power turned on? Hold down F for at least a few seconds. 10 ● Is out of range indicator displayed? Move to a location where out of range indicator is no longer displayed, and try again.
Symptom Possible Cause Remedy Page ● Is the earpiece volume too low? Press u during a call to increase the earpiece volume. 16 When making a call, a beeping sound is heard from the earpiece and a connection cannot be established. ● Is out of range indicator displayed? Or are you in a location where the signal is too weak? Move to a location where out of range indicator is no longer displayed.
FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
