User's Manual

123
SETTINGS & TOOLS
The pedometer detects the small vibrations generated when you
are walking or jogging and counts them as steps. The error of the
count increases if your steps cannot be detected normally or if
vibration other than from walking or jogging is detected.
The steps counted by the pedometer may differ from the actual
number of your steps. Use the counted result only as a guide.
The length between points displayed in Virtual Trek mode is not
accurately scaling down the actual distance between points.
•
•
•
Thermometer
In Thermometer mode, the current temperature is displayed in both
Fahrenheit and Celsius.
In Temperature Comparison mode, the current temperature is
displayed in both Fahrenheit and Celsius, along with the highest and
lowest temperatures from 2008 and 2009 in three cities selected from
the city list, which is based on the capital city of each state.
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
 Tools.
2. Select G’zGEAR, then press the Center Select Key [OK], 
Thermometer.
3. The following keys are available in the Thermometer:
Directional Key left or right: Switches the mode.
Directional Key  up or down: Changes the date for displaying
the information. (Only in Temperature Comparison mode)
Right Soft Key [Options]: Displays the following option:
About: Displays the description about the Thermometer tool.
Thermometer: Switches to Thermometer mode.
Temperature Comparison: Switches to Temperature
Comparison mode.
Point Selection: Allows you to select three cities to be displayed
in Temperature Comparison mode.
•
•
•