User's Manual

159
SETTINGS & TOOLS
Automatic: Scan radio channels based on the Automatic setting.
NOTES
After you purchase your handset but before you activate it by
obtaining a phone number, the available settings will be Home
Only, Automatic A, and Automatic B.
After the handset is activated by obtaining a phone number,
Home Only and Automatic settings will be available.
When PTT mode is on, you cannot change this setting.
•
•
NAM Selection
To select the handset’s NAM (Number Assignment Module) if the
handset is registered with multiple service providers:
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
 Phone Settings,  NAM Selection.
2. Select NAM 1 or NAM 2, then press the Center Select Key [SET].
NOTES
When PTT mode is on, you cannot change this setting.
When you change this setting, the handset will restart.
•
•
Motion Detection
To turn the Motion Detection feature On or Off:
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
 Phone Settings.
2. Select Motion Detection, then press the Center Select Key [OK].
3. Select one of the following settings, then press the Center Select
Key [OK].
G’zGEAR / My Pics/Videos
4. Select On or Off, then press the Center Select Key [OK].