You can use the Phone application to make a call. You can dial an incoming, outgoing, or missed call number recorded in the call log. Making a call 1. Touch the Phone icon <> on the Home screen or in the Launcher. The Phone application opens. Touch a tab to switch to Call log, Contacts, Groups, or Favorites. Touch to erase digits one by one. Touch and hold to erase Touch to call your voicemail. the entire phone number. Touch to make a call. 2.
3. Touch the call button <> to make the call. The call in progress screen appears. Phone ERI Banner Call duration Caller’s phone number or City ID name in Contacts. Touch to end a call. Touch to enter additional phone number. Touch to mute the Touch to turn on the microphone. speakerphone. Press the Volume keys ● to adjust the call volume. 4. Touch the end call button <> to end a call. When a call ends, the Call log screen appears. 5.
To end a call in progress when another application is opened, ● touch the Phone icon <> on the Home screen or in the Launcher, touch Return to call in progress, and then touch the end call button <>. Answering a call 1. When there is an incoming call, the Incoming call screen opens. Information such as the caller’s phone number or the caller’s name is displayed if the phone number is already stored in Contacts. Information such as caller’s phone number or name stored in Contacts.
Rejecting an incoming call 1. When there is an incoming call, the Incoming call screen opens. Drag the slide button <> to the left to reject the incoming Phone call. 2. The Send Message dialog appears prompting you to send a message to a caller after you rejected an incoming call. Touch OK to compose a message. See “Messaging” on page XXX. Touch Cancel to return to the Home screen. NOTE When you reject a call, the caller is sent directly to voicemail.
Muting the microphone 1. To mute the microphone, touch the microphone button <> on the call in progress screen. When you mute the microphone, the mute icon appears on the Status bar. 2. To un-mute the microphone, touch the microphone button <> again on the call in progress screen. NOTE The microphone un-mutes automatically when you end a call.
Managing multiple calls Phone Switching between multiple calls If you accept a new call when you are already on a call, you can switch between the two calls. 1. When there is another incoming call while you are already on a call, the Incoming call screen opens. 2. Drag the call button <> to the right to answer the new call. When you answer the new call, the current call is placed on hold. 3. Touch the swap button <> to put the current call on hold and connect to another call. 4.
NOTES After merging calls into a conference call, you can touch the swap ● button <> on the call in progress screen to put the second participant on hold and talk privately with the first participant. Touch the swap button <> again to switch to the second participant. Contact your wireless service provider to learn whether they ● support conference calls and how many participants you can include.
3. Touch a phone number or name. The details of the Call log appear. Phone Touch to make a cal. Touch to send a text message. If the phone number is not in Contacts, Add to contacts is displayed and you can touch to add the phone number to Contacts. If the phone number is already in Contacts, View contact is displayed and you can touch to open the details of the Contact. 4. Touch Call phone number or name to make a call.
If there is a missed call, a missed call icon ● is displayed in the Status bar. Drag the Status bar down to open the Notification panel and touch Missed call to check the Call log. Clearing the entire Call log 1. On the Call log screen, touch the Menu key > Clear call log. Using voicemail Setting up voicemail You should set up your voicemail according to the tutorial you hear the first time you call the voicemail. 1. Touch the Launcher icon <> on the Home screen. The Launcher opens. 2.
5. Follow the prompts to enter your password and retrieve your messages. Phone NOTES ● When you have a new voicemail message, the new voicemail icon appears on the Status bar. Drag the status bar down to open the Notification panel and touch New voicemail to open the Voicemail menu screen. If you have a Visual Voice Mail contract, touch New Visual Voice Mail displayed in the Notification panel to open a Visual Voice Mail.
4. Touch the Home key to return to the Home screen and wait 5 minutes before starting to use Visual Voice Mail. Logging in to Visual Voice Mail 1. Touch the Launcher icon <> on the Home screen. The Launcher opens. 2. Touch the Voicemail icon<>. 3. When you login to Visual Voice Mail for the first time, the Terms of Service screen is displayed. Read the displayed content and touch Accept. 4. Touch “Password” field and enter your password.
4. Touch the voicemail you want to listen to. The Voicemail player screen is displayed. Message type icon Touch to display the next Voicemail. Phone Touch to display the previous Voicemail. Caller’s phone number or name in Contacts. Date and time the voicemail was recorded Touch to turn off the sound. Touch to play a voicemail. Touch to return a call to the sender Touch to delete a voicemail. of voicemail. Touch to reply by voicemail, text message, or Email. 5.
Sort by: Allows you to sort the list by Caller, Date, Sensitivity, Listen to, Priority, or Duration. More: See below. ● Touch the Menu key > More to access the following options: Logout: Logs out of Visual Voice Mail. Preferences: Allows you to change the Visual Voice Mail settings. See “Changing Visual Voice Mail settings” on page XXX. About: Displays the version of Visual Voice Mail. Cancel subscription: Cancels the Visual Voice Mail subscription.
Using the menu on the Voicemail player screen The following menu is available on the Voicemail player screen: ● Touch the Menu key to access the following options: Compose: Allows you to compose a voicemail. See “Composing and sending a voicemail” on page XXX. Phone Options: See the following list. Preferences: Updates the Visual Voice Mail settings. See “Changing Visual Voice Mail settings” on page XXX. About: Displays the Visual Voice Mail version.
Composing and sending a voicemail 1. From the Visual Voice Mail screen or Voicemail player screen, touch the Menu key > Compose. The Compose Voice Message screen is displayed. Touch and enter a phone number or a contact’s name. Touch to play recorded voicemail. Touch to start recording. Touch to turn off the sound. Send the voicemail. Touch to stop recording or playback. Touch to cancel creating voicemail. 2. Touch the “To” field 3. Enter a phone number or a contact’s name.
NOTE Touch the Menu key on the Voicemail composing screen to access the following options: Add: Allows you to select and add a recipient from Contacts. Phone Mark Urgent: Sets the status of the voicemail to urgent. Mark Private: Sets the status of the voicemail to private. Changing Visual Voice Mail settings 1. From the Visual Voice Mail screen, touch the Menu key > More > Preferences. 2. Change the following settings as necessary.
TIA Safety Information The following is the complete TIA Safety Information for wireless handheld phones. ■ Tips on Efficient Operation Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to consume more power than otherwise needed. ■ Driving Talking on the phone while driving is extremely dangerous and is illegal in some states. Remember, safety comes first.
■ Electronic Devices Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. Most modern electronic equipment is shielded from RF energy. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Therefore, use of your phone must be restricted in certain situations.
Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Hospitals and Health Care Facilities Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
■ Blasting Areas To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted “Turn off two-way radio”. Obey all signs and instructions. ■ Potentially Explosive Atmospheres Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
■ SAR information THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid after searching on TYKNX9320. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) web-site at http://www.ctia.org.
● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected ● Consult the dealer or an experienced radio/TV technician for help. ■ FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received.
exposure decreases rapidly with increasing distance from the source. The so-called “cordless phones,” which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures well within the FCC’s compliance limits. ■ Do wireless phones pose a health hazard? The available scientific evidence does not show that any health problems are associated with using wireless phones.
Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following: ● Support needed research into possible biological effects of RF of the type emitted by wireless phones; ● Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and ● Cooperate in providing users of wireless phones with the best possible information on possible effects of wire
thus not the primary subject of the safety questions discussed in this document. ■ What are the results of the research done already? The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radiofrequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories.
■ What research is needed to decide whether RF exposure from wireless phones poses a health risk? A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists.
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users.
■ What about children using wireless phones? The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.
■ Do wireless phone accessories that claim to shield the head from RF radiation work? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone.
phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a “compatible” phone and a “compatible” hearing aid at the same time. This standard was approved by the IEEE in 2000. FDA continues to monitor the use of wireless phones for possible interactions with other medical devices.
Public Safety Answering Points (PSAPs) to identify the location of the caller in case of emergency. Generally, the rules require that carriers identify an E911 caller’s location within 50 meters of the actual location for 67 percent of calls and within 150 meters of the actual location for 95 percent of calls.
911 Using Any Available System 1. Touch Emergency call. 2. Enter “911” then touch the call button <>. 3. The call connects. 4. The phone remains in Emergency Mode for 5 minutes. 5. To exit emergency mode, press the Power key _. Compliance with Other FCC Regulations ■ Operating Procedures Never violate any of the following Rules and Regulations of the FCC when using your Cellular Phone. Such violations are punishable by fine, imprisonment or both. ● Never use obscene, indecent, or profane language.
and/or property damage due to battery liquid leakage, fire or rupture. DO NOT use or store this equipment in a place where it will be exposed to high temperatures, such as near an open flame or heat-emitting equipment. DO NOT drop your device or subject it to severe shock. When not using lay down the unit to avoid possible damage due to instability. DO NOT expose this equipment to rain or spilled beverages. DO NOT use unauthorized accessories. DO NOT disassemble the phone or its accessories.
cause electric shock, injury or product failure. If the device does not finish recharging within the specified timeframe, stop charging. It may cause leakage, heat generation, explosion or fire. If the device is damaged by dropping it and the internal parts are exposed, do not touch the exposed parts. You might get an electric shock or injured from damaged parts. Call customer service for assistance. Do not place the device on an unstable area, such as wobbly stools or slanted places.
tape, MOs, MDs, prepaid cards, or other similar objects. It may destroy or corrupt the data. Never press or poke the phone’s display with your finger or another object. It may cause damage to the display. Never twist the device. It may cause product failure. DO NOT put stickers on the LCD screen or keypad. These stickers may touch and press keys when the Flip is closed. This may cause improper operating of the phone. ■ Antenna Safety Use only the supplied or an approved replacement antenna.
● If the battery is stored in temperatures above or below the recommended range, give it time to warm up or cool down before using. ●Completely drain the battery before recharging. It may take one to four days to completely drain. ● ● ● ● When the device is not used for long period, remove the battery from the device. Store the discharged battery in a cool, dark, and dry place. Purchase a new battery when its operating time gradually decreases after fully charging.
please call RBRC at (800) 822-8837 for proper disposal tips. Never touch any fluid that might leak from the battery. Such liquid when in contact with the eyes or skin, could cause injury to the skin or eyes. Should the liquid come into contact with the eyes, irrigate the eyes thoroughly with clean water and immediately seek medical attention. In the event the liquid comes into contact with the skin or clothing, wash it away immediately with clean water.
If the plug is not inserted completely, it may cause electric shock, heat generation or fire. Do not use a damaged AC-Adapter or loosened plug. Do not touch the charging terminal with your hand or finger while it is conducting electricity. It may cause electric shock, injury or product failure. Unplug the AC charger during lightning storms to avoid electric shock or fire. Do not overload a power outlet with too many devices.
as tendonitis, carpal tunnel syndrome, or other musculoskeletal disorders: ● ● ● Take a minimum 15-minute break every hour of game playing. If your hands, wrists, or arms become tired or sore while playing, stop and rest for several hours before playing again. If you continue to have sore hands, wrists, or arms during or after play, stop playing and see a doctor. Camera Do not aim your camera at the Sun. The sunlight passing through the Camera/Camcorder Lens may cause damage to the camera.
What is Hearing Aid Compatibility? The Federal Communications Commission has implemented rules and a rating system designed to enable people who wear hearing aids to more effectively use these wireless telecommunications devices. The standard for compatibility of digital wireless phones with hearing aids is set forth in American National Standard Institute (ANSI) standard C63.19.
For more information about hearing aids and digital wireless phones: ● FCC Hearing Aid Compatibility and Volume Control ● Hearing Loss Association of America http://www.fcc.gov/cgb/dro/hearing.html http://www.hearingloss.org/learn/cellphonetech.asp ● CTIA http://www.accesswireless.org/hearingaid/ ● Gallaudet University, RERC http://tap.gallaudet.edu/voice ■ Teletypewriter (TTY) Devices You can use an optional teletypewriter (TTY) device with your phone to send and receive calls.
players and cellular telephones, at high volume settings for long durations may lead to permanent noise-induced hearing loss. This includes the use of headphones (including headsets, earbuds and Bluetooth or other wireless devices). Exposure to very loud sound has also been associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to sound and distorted hearing. Individual susceptibility to noise-induced hearing loss and other potential hearing problems varies.
■ You can obtain additional information on this subject from the following sources: American Academy of Audiology 11730 Plaza American Drive, Suite 300 Reston, VA 20190 Voice: (800) 222-2336 Email: info@audiology.org Internet: www.audiology.org National Institute on Deafness and Other Communication Disorders National Institutes of Health 31 Center Drive MSC 2320 Bethesda, MD USA 20892-2320 Voice: (301) 496-7243 Email: nidcdinfo@nih.gov Internet: www.nidcd.nih.
To mail in your old wireless device to PCD Personal Communications for recycling purposes, simply package your old wireless device and any accessories (including discharged batteries) in appropriate shipping materials and mail to: For Recycling Personal Communications Devices, LLC 555 Wireless Blvd. Hauppauge, NY 11788 Wireless phones also can be donated to the Wireless Foundation’s DONATE A PHONE CALL TO PROTECT campaign.