User`s manual

English-13
Troubleshooting
Problem Solution
No picture, but a message is
displayed.
• BesuretoperformachannelscanbeforeyouwatchtheTVprogram.
• Checktoseeifantennaisproperlyconnected.
No picture • ChecktomakesurethatVideoInputisselectedto[OPTION].
• Checktoseeifthismoduleisproperlyinstalled.Movethemawayfromthe
monitor if necessary.
No sound • Checktoseeifspeakercableisproperlyconnected.
• Checktoseeifmuteisactivated.
• Checktoseeifvolumeissetatminimum.
• ChecktomakesurethatAudioInputisselectedto[OPTION].
No sound from S/P DIF out • Checktoseeifopticalcableisproperlyconnected.
• Checktoseeifaudiooutputformat(PCM/DOLBYD)for[Sound]settingis
suitable for your digital audio system.
• Checktoseeifaudiooutputformatsettingisnotsetto[Off].
Not all channels are available after
performing an [Auto Scan]
• Performan[AutoScan]toscanthesemissingchannels.Oncethetuner
picks up the signal, all the transmission parameters will be stored in tuner’s
memory automatically.
No Subtitle/Teletext displayed • MakesurethechannelyouarewatchingcarriesSubtitle/Teletext
information.
• Pressthe
button on the Remote Control to check for Subtitle/Teletext
data output.
IPTV does not work • ChecktoseeifLANcableisproperlyconnected.
• Checktoseeifthenetworksettingsofbothofthismoduleandyoursystem
is correct.
Remote control does not work • Makesurethebatteriesareinsertedproperly.
• Testthebatteriesforstrength/life.
• Makesuretopointtheremotedirectlyatthesensoronthemonitor.
• CheckiftheremoteisinRemoteIDmode.
• Theremotecontrolmaynotfunctionwhenindirectsunlightorwhenthere
is strong illumination on the remote sensor of the monitor.