Installation and Assembly: 3 x 3 Cart Model: DS-VWC655-3x3 Maximum Load Capacity 1000 Ibs (454 kg) 1 of 13 Visit the Peerless Web Site at www.peerlessmounts.com ISSUED: 11-16-11 SHEET #: 125-9265-2 02-24-12 For customer care call 1-800-865-2112.
PARTS LIST A B C D E F G H I J K L M N O P Q R S T U V W X Y Z AA BB CC DD EE FF GG HH Description vertical support adapter brackets horizontal support shelf 5" caster 1/4" flat washer M8 x 25 mm phillips screw 5/16 flat washer 5/16 split washer 1/4-20 x 3.5" hex head screw 1/4-20 nylock nut .38 OD x .
U V X W Z Y AA GG BB DD EE 3 of 13 Visit the Peerless Web Site at www.peerlessmounts.com CC FF ISSUED: 11-16-11 SHEET #: 125-9265-2 02-24-12 For customer care call 1-800-865-2112.
Assembling Cart 1 Attach two horizontal supports (C) to vertical support (A) using eight 1/4-20 x 3.5" hex head screws (J), 1/4" SAE washers (F) and 1/4-20 nylock nuts (K). C K F J A 2 Attach horizontal supports (C) to second vertical support (A) using eight 1/4-20 x 3.5" hex head screws (J), 1/4" SAE washers (F) and 1/4-20 nylock nuts (K). Attach horizontal support (C) to vertical supports (A) using eight 1/4-20 x 3.5" hex head screws (J), 1/4" SAE washers (F) and 1/4-20 nylock nuts (K).
4 Attach four swivel casters (E) to vertical supports (A) using sixteen M8 x 25 mm pan phillips screws (G), split washers (I) and 5/16" SAE flat washers (H). G I H E A 5 Attach two rail brackets (Y) together using two rail connection brackets (X) with eight M5 x 10 mm pan phillips screws (AA), lock washers (CC), and flat washers (BB). X BB CC AA Y 5 of 13 Visit the Peerless Web Site at www.peerlessmounts.com ISSUED: 11-16-11 SHEET #: 125-9265-2 02-24-12 For customer care call 1-800-865-2112.
Determine position of horizontal rails assemblies using the formula below. 1. Locate the position of the lower horizontal rail assemblies and attach to vertical supports (A). 2. Use display height to determine location of upper horizontal rail assemblies, NOTE: Horizontal rail assemblies must be secured using twenty-four 1/4-20 x 3.5" hex head screws (J).
Attach three horizontal rails assemblies onto vertical supports (A) using twenty-four 1/4-20 x 3.5" hex head screws (J), 1/4" SAE washers (F) and 1/4-20 nylock nuts (K) as shown in detail 2. Make sure that horizontal rail assemblies are level then tighten all 1/4-20 x 3.5" hex head screws (J). Place two tube caps (R) into tops of vertical supports (A) as shown in detail 2. NOTE: horizontal rails must be secured using twenty-four 1/4-20 x 3.5” hex head screws (J).
9 NOTE: Connection brackets (GG) orientation. Place connection brackets (GG) onto rail connection brackets (X) as shown below. X RIGHT SIDE GG FRONT OF DISPLAY CART LEFT SIDE X GG FRONT OF DISPLAY CART 8 of 13 Visit the Peerless Web Site at www.peerlessmounts.com ISSUED: 11-16-11 SHEET #: 125-9265-2 02-24-12 For customer care call 1-800-865-2112.
-1 Attach connection brackets (GG) onto rail connection brackets (X) as shown below. Secure one connection brackets (GG) with four M5 x 10 mm phillips screws (AA), lock washers (CC), and flat washers (BB) as shown below. Repeat step for remaining three connection brackets (GG). GG BB AA CC X RIGHT SIDE SHOWN ABOVE 9 of 13 Visit the Peerless Web Site at www.peerlessmounts.com ISSUED: 11-16-11 SHEET #: 125-9265-2 02-24-12 For customer care call 1-800-865-2112.
Attach adapter brackets (B) to back of display using four M6 x 12 mm phillips screws (O) or M6 x 16 mm Phillips screw (HH) with nylon shoulder washer (L), or four M8 x 15 mm phillips screws (N) as shown below. Adapter Bracket Mounting Patterns B 200 mm MIN 600 mm MAX L 200 mm display 400 mm 300 mm PLP PLATE N or O,HH 11 Hook display and adapter brackets (B) onto horizontal rail assemblies as shown below. NOTE: Start with bottom display.
12 Fasten shelf (D) onto horizontal support (C) using three self-drilling screws (FF) as shown below. C FF D 11 of 13 Visit the Peerless Web Site at www.peerlessmounts.com ISSUED: 11-16-11 SHEET #: 125-9265-2 02-24-12 For customer care call 1-800-865-2112.
Adapter Bracket Adjustment 13 Use legend below to determine position of display. NOTE: Each knob can be adjusted independently for fine tuning angle adjustments. Turn knobs CLOCKWISE to raise display height. Turn knobs CLOCKWISE to push out display. Turn knobs COUNTER-CLOCKWISE to lower display height. Turn knob COUNTER-CLOCKWISE to pull in display. UP DOWN IN OUT KNOB 12 of 13 Visit the Peerless Web Site at www.peerlessmounts.
Attaching Covers 14 NOTE: Position bottom front and back covers first Position front bottom cover (U). Secure covers in place using four decorative screws (DD) as shown below. Position back bottom cover (V). Secure covers in place using four decorative screws (DD) as shown below. Position upper cover (W) on front of vertical supports (A). Secure covers in place using four decorative screws (DD) as shown below. Position upper cover (W) on back of vertical supports (A).