Technologies PlasmaSync Plasma Monitor User's Manual 42/50PD1

Daisy-chaining Your monitors

The REMOTE IN/OUT terminals allow you to control

multiple monitors using one remote control.

Note:

The connection of more than three PlasmaSync

42/50PD1 or more with THROUGH OUT (VIDEO)

terminals may degrade image quality.

To do so:

When using the VIDEO inputs:

THROUGH OUT (VIDEO) Connections

1. Connect THROUGH OUT BNC or S-VIDEO OUT to

external components to relay the signal input at

VIDEO IN(BNC-type), or S-VIDEO IN.

When using the RGB inputs:

THROUGH OUT Connections

1. (RGB2): Connect the R.G.B.H/CS and V THROUGH

OUT terminals to relay the signal input at the R.G.B.H/

CS and V IN terminals.

2. Connect the REMOTE IN of the monitor to the RE-

MOTE OUT of the next monitor using the optional re-

mote cable.

Note:

''Plug and Play'' is not available for the RGB

2 BNC terminals.

Note:

A maximum of 3 units can used which a

cascade connection. (VIDEO, RGB2)