Server Operation Manual

Operation Procedure
855-900549 3-12
1) SP console screen and operation during AC LINK setup
iSPyz:---> sg <ENTER> <= Enter sg and press Enter
Display and modify settings of system and iSP.
s) System settings
i) iSP settings
a) display all settings
Select ? (s/i/a/CR=exit) : s <= Enter s and press Enter
System setting menu:
c) system common settings (maintenance only)
p) partition settings (maintenance only)
b) partition boot methods and Hot-plug permission
a) display all settings
Select ? (c/p/b/a/CR=back) : b <= Enter b and press Enter
Partition boot methods and Hot-plug permissions:
¦ ¦Wake ¦Hot-Plug permission
part.¦AC- ¦ On ¦ PCI-card ¦ CELL
¦LINK ¦ LAN ¦PCI(X)¦PCE-EX¦ add ¦remv ¦swap
-----+-----+-----+------+------+-----+-----+-----
0 ¦ off ¦ off ¦ YES ¦ no ¦ no ¦ no ¦ no
1 ¦ off ¦ off ¦ YES ¦ no ¦ no ¦ no ¦ no
Modify? (y/[n]) : y <= Enter y and press Enter
Enter partition number? (0-7/CR=back) : 0
AC link mode (o[n]/of[f]/CR=skip) : <= Enable AC LINK and press Enter
Wake on LAN (o[n]/of[f]/CR=skip) :
Hot plug permission:
PCI(X) card? (y[es]/n[o]/CR=skip) :
PCI-Ex card? (y[es]/n[o]/CR=skip) :
(Omitted)
Enter partition number? (0-7/CR=back) :