User Manual

English-13
English
Wireless Remote Control
A POWER ON/STANDBY Button
Switches the power on/standby.
B INPUT Button
Selects the input signal.
Input signal for the MEDIA PLAYER is shown as MP.
C OPTION MENU Button
D KEYPAD
Press the buttons to set and change passwords, change
channel and set REMOTE ID.
Below buttons are used for CEC (Consumer Electronics
Control) (See
page 44) and the Media Player function
(See page 22): 1 , 2 , 3 , 5 , 6 .
E ENT Button
Confirm the AUTO PLAY FOLDER in Media Player.
F DISPLAY Button
Turns on/off the information OSD. See
page 28.
If you lock remote control buttons using the IR LOCK
SETTINGS function, you can unlock the buttons by holding
down this DISPLAY button for more than 5 seconds.
G MENU Button
Turns on/off the menu mode.
H AUTO SET UP Button (This button does not work)
I EXIT Button
Returns to the previous menu within the OSD menu.
J UP/DOWN Button ( / )
Acts as
button to move the highlighted area up or down
to select adjustment items within the OSD menu.
When using PIP (picture in picture), moves the small screen
up or down.
K MINUS/PLUS (-/+) Button
Increases or decreases the adjustment level within the OSD
menu settings.
When using PIP (picture in picture), moves the small screen
left or right.
L SET/POINT ZOOM Button
SET: When OSD is shown, this button acts as “set button”
when you make a selection.
POINT ZOOM: When OSD is not shown, this button acts as
“point zoom button”.
M VOLUME UP/DOWN Button (VOL +/-)
Increases or decreases the audio output level.
N CH/ZOOM UP/DOWN Button (CH/ZOOM +/-)*
1
Increases or decreases the POINT ZOOM level.
Please refer to POINT ZOOM (See page 59).
O GUIDE Button*
1
P MUTE Button
Turns on/off the mute function.
Q PICTURE MODE Button
Selects the picture mode, [HIGHBRIGHT], [STANDARD],
[sRGB], [CINEMA], [CUSTOM1], [CUSTOM2],
[SVE-(1-5) SETTINGS]. See page 31.
HIGHBRIGHT: For moving images such as DVD.
STANDARD: For images.
sRGB: For text based images.
CINEMA: For movies.
CUSTOM1 and CUSTOM2: Custom setting.
SVE-(1-5) SETTINGS: For images and movies.
R ASPECT Button
Selects the picture aspect, [FULL], [WIDE]*, [DYNAMIC]*,
[1:1], [ZOOM] and [NORMAL]. See
page 21.
* HDMI1, HDMI2, HDMI3 inputs only.
S AUDIO INPUT Button
Selects the audio input source [IN], [HDMI1], [HDMI2],
[HDMI3], [DisplayPort1], [DisplayPort2], [OPTION]*
1
, [MP].
T STILL Button
ON/OFF button: Activates/deactivates still picture mode.
CAPTURE button: Captures still picture.
NOTE: This function deactivates when selecting MULTI
PICTURE MODE, TEXT TICKER, SCREEN SAVER, POINT
ZOOM, IMAGE FLIP except for NONE, SUPER in INPUT
CHANGE, TILE MATRIX.
If input signal is OPTION, this button’s actions depend on
which option board you are using.
*1: This button’s action depends on which option board you are using.