User Manual
Table Of Contents
- DECLARATION OF CONFORMITY
- Important Information
- Safety Precautions, Maintenance & Recommended Use
- Installation
- Parts Name and Functions
- Setup
- Connections
- Basic Operation
- OSD (On-Screen-Display) Controls
- Remote Control Functions
- Multiple Monitors Connection
- Controlling the LCD monitor via RS-232C Remote Control
- Controlling the LCD monitor via LAN Control
- POINT ZOOM
- PROOF OF PLAY
- INTELLIGENT WIRELESS DATA
- MULTIPICTURE matrix
- Video out
- Features
- Troubleshooting
- Specifications - C751Q
- Specifications - C861Q
- Specifications - C981Q
- Manufacturer’s Recycling and Energy Information
- [Notice] About the MPEG-4 AVC, MPEG-4 Visual license included in this product
English-49
English
This LCD monitor can be controlled by connecting a personal computer with an RS-232C (reverse type) terminal.
Functions that can be controlled by a personal computer are:
• PowerONorstandby.
• Switchingbetweeninputsignals.
• SoundMuteONorOFF.
Connection
LCD Monitor + computer.
• Please turn off the monitor’s main power when connecting a computer to the monitor.
• Please turn on the connecting computer first then turn on the monitor’s main power.
If you turn on the computer and monitor in reverse order, the com port may not work.
• When controlling the monitor connected with an RS-232C cable, please refer to the Control command diagram (See
page 57)
or see the “External_Control.pdf” file on the CD-ROM supplied with the monitor.
RS-232C Cable
Computer
RS-232C
NOTE: If your computer is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact
your supplier for details.
For the pin assignment, please see “2) RS-232C input/output” on page 50.
To control a monitor, please use the control command. Instructions for the control command can be found on the CD included
with the monitor. The file is called “External_control.pdf”.
Controlling the LCD monitor via RS-232C Remote Control