User Manual
Table Of Contents
- Important Information
- Installation
- Parts Names and Functions
- Connections
- Basic Operation
- Advanced Operation
- External Control
- Troubleshooting
- Specifications
- Trademark and Software License
- External Resources
- OSD Controls List
- Manufacturer’s Recycling and Energy Information
English - 53
Connect the monitor with a commercially-available LAN cable to congure the LAN settings using the HTTP server function.
This monitor uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. Refer to the help les for
the Web browser to change the settings to use JavaScript and Cookies.
To access the HTTP server, launch a web browser on a computer connected to the same network as the monitor and enter the
following URL in the Web address eld.
http://<Address IP of the monitor>
• The control software can be downloaded from the NEC Display website.
By default, the IP address of the monitor is set automatically. After a reset, the IP address is obtained
automatically.
Depending on the network environment, the display speed and response to commands or clicks on buttons may
be slow, or the operations may not be recognized. In such a case, consult your network administrator.
The monitor may not respond if the buttons shown on the browser are repeatedly pressed in rapid intervals. In
such a case, wait a moment and try again. If you still can’t get a response, turn the monitor off and then back on.
If the monitor Network Settings screen does not appear in the Web browser, press the Ctrl+F5 keys to refresh
your Web browser.
To control the monitor via a LAN, see “External_Control.pdf” in our Website (see “Appendix B External
Resources” page 71). If the screen does not appear, clear the cache of the Web browser.
Connect the monitor to the network using a commercially-available LAN cable before attempting to use browser operations.
Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting
method. Although the type of the proxy server will be a factor, it is possible that items that have been set will not be shown
depending on the effectiveness of the cache, and the settings congured from the browser may not be reected in operation. It
is recommended that a proxy server is not used unless the network environment requires it.