User's Manual

Programming 1 - 1
Programming
S
ECTION
1
O
VERVIEW
The VMS ETU is recognized by the Electra Elite system as having four or
eight digital voice mail (DVM) ports; therefore, make all assignments
required for DVM.
The FMS( )-U10 ETU has only four ports
1. Install VMS/FMS( )-U10 ETU.
2. Program the telephone system to support digital voice mail (DVM).
Enter Programming Mode
1. From Port 01 or 02, 
2. Then

3. Dial
Graphic key face (
e.g.
,
)
means press indicated key.
Assign Function Keys
Program Memory Block 4-12, Line Key Selection for Telephone Mode.
This program assigns line keys as feature access keys that are used for
live record. Each live record must have a feature key assigned as follows:
1. Press LK4.
2. Dial
3. Press followed by the port number of the extension to
program.
4. Enter line key number (
e.g.
, ).
5. Press LK6 and key number to assign the line as feature access.
6.
to write data and advance to the next line key number.
7. Repeat Steps 5 and 6 for each line key.
8. Repeat Steps 3~7 for remaining extensions that require live record.
9.
.