User's Manual

EliteMail VMS/EliteMail Limited Issue 3
Hardware Specifications 2 - 3
To upgrade VMS(4)-U10 ETU to VMS(8)-U10 ETU
1. Verify that the HDD LED on the VMS(4)-U10 ETU is off.
2. Verify that the BCLR LED is green.
3. Turn off the MB (Make Busy) switch and verify that the MB LED is
on.
4. Wear a grounding strap when removing the VMS(4)-U10 ETU from
the Electra Elite KSU.
5. Locate connectors J10 and J8 on the left side of the ETU, and press
down on the DSP-F-21 Unit until a secure connection is made.
6. Return the ETU to the KSU.
7. Turn the MB Switch on.
8. Connect the PC to the VMS( )-U10 ETU.
9. Shut down the Voice Mail Application.
10. From the C:\VMAIL prompt, enter ACTIVATE.
11. Enter the Activation Code. (Call NEC customer service for this code).
12. Restart the Voice Mail system.
To upgrade from
VMS(2)-U10 to VMS(8)-U10, perform upgrade
from VMS(2)-U10 to VMS(4)-U10, and then perform upgrade
from VMS(4)-U10 to VMS(8)-U10.
S
ECTION
4
U
PGRADE
E
LITE
M
AIL
L
IMITED
TO
4-P
ORTS
The EliteMail Limited hardware is shown in Figure 2-2 FMS( )-U10 ETU.
To upgrade from 2-port to 4-port configuration:
1. Connect the PC to the FMS( )-U10 ETU.
2. Shut down the Voice Mail Application.
3. From the C:VMAIL prompt, enter ACTIVATE.
4. Enter the Activation Code (Call NEC Customer Service for the code).
5. Restart the VoiceMail system.