User's Manual

ManualsBrandsNEC ManualsCell PhoneNEC 85480QRO02

NCS

Feature Phone

Quick Reference User Guide

Part No. 85480QRC02

April 2001

Printed in U.S.A. (2106)

Quick Reference for Other Features

Data Port: Located on the right side of the phone, you can

connect any standard telephone device to the

phone (computer modem, answering machine,

fax machine, etc.).

Time/Date: Not user programmable. The information is

initially received from the Caller ID information.

The telephone will then maintain the correct

time/date.

Tone/Pulse: Set the Tone/Pulse switch located on the back edge

of the phone to the required setting for your service

(Tone=touch-tone dialing, Pulse=rotary dial).

Volume, Handset: Press VOLUME.

Pressing VOLUME again resets the volume to

its normal level.

Hanging up the call will also reset the volume to

its normal level.

Volume, Ringer: Adjust the switch on the left side of the phone to

Hi, Low or Off.

Volume, Speaker: Adjust the sliding switch on the right side of the

phone.

NEC America Inc., Corporate Networks Group

4 Forest Parkway, Shelton, CT 06484

TEL: 203-926-5400 FAX: 203-929-0535

cng.nec.com

Summary of content (4 pages)

PAGE 1
Quick Reference for Other Features Data Port: Located on the right side of the phone, you can connect any standard telephone device to the phone (computer modem, answering machine, fax machine, etc.). Time/Date: Not user programmable. The information is initially received from the Caller ID information. The telephone will then maintain the correct time/date.
PAGE 2
NCS Feature Telephone NCS Feature Telephone Quick Reference for Programmed Speed Dial Keys Installing the Phone . . . Connecting the Power Pack and Telephone: 1. Plug the power pack into a standard 110V AC power outlet. The mounting hole is provided to secure the power pack to the outlet. 2. Using the 3’ modular line cord provided, connect one end to the RJ14 telephone jack. Connect the opposite end to the LINE side of the power pack. 3.
PAGE 3
NCS Feature Telephone NCS Feature Telephone Turn Off Your Telephone’s Mic So Your Caller Can’t Hear Your Voice. . . Disable the Handset Microphone and/or the Speakerphone: 1. While on a call, press MUTE. The caller will not hear your voice and the MUTE key will light to show that the feature is activated. To deactivate, press MUTE again. Redial Your Last Number . . . To Automatically Redial the Last Number that was Manually Dialed: 1. Lift the handset. 2. Press REDIAL. The last number dialed called.
PAGE 4
NCS Feature Telephone NCS Feature Telephone Using a Headset . . . Install the Headset: Placing and Answering Calls with a Headset: Using Callback . . . 1. Plug the modular end of the headset cord into the modular port of the telephone labeled HEADSET. 2. Slide the HEADSET/HANDSET selector switch to the HEADSET position. Enter the area code into storage to properly use this feature. This allows the phone to recognize your local area code and remove it from the dialed number.