User's Manual Wireless Display Media Player SB-06WC
Index Declaration of conformity ···················································································English-1 Safety Precautions and Maintenance ································································English-5 Information ·········································································································English-6 Accessory · ·········································································································English-7 Part Names ·············
Declaration of conformity FCC statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC Industry of Canada statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
CE statement Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: - EN 60950-1:2006+A11:2009+A1:2010+A12:2011 - EN62311 : 2008 - EN 300 328 V1.8.1: 2012 - EN 301 893 V1.7.1: 2012 - EN 301 489-1 V1.9.2: 2011 - EN 301 489-17 V2.2.
Nederlands [Dutch] Hierbij verklaart NEC Display Solutions, Ltd. dat het toestel Wireless Display Media Player (Model:SB-06WC) in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, NEC Display Solutions, Ltd., jiddikjara li dan Wireless Display Media Player (Model:SB-06WC) jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Safety Precautions and Maintenance For optimum performance, please note the following when setting up and using the Wireless Display Media Player. Please adhere to the precautions stated in the user’s manual of the projector or display to be connected to this product. In the event of a fault occurring, pull out the power plug of the display or projector immediately! If not, this may result in fire or electric shock. Pull out the power plug from the electrical outlet immediately.
Information Corresponding regions, corresponding countries of Wireless LAN Unit Please refer to our company website for the list of regions and countries where the use of the product is supported. Please duly note that use of the product in a region or country which does not support its use may contravene the laws on electromagnetic transmissions in that country. URL: http://www.nec-display.com/ap/en_projector/others/wlan.
Accessory The following accessories are enclosed with the product at the time of purchase.
Please contact your dealer if you find any of the accessories missing or damaged.
Part Names SB-06WC Main unit 1 LAN Port (RJ-45) This is used when functions are expanded in future. 4 Indicator Displays the status of the product. When using the Intel® WiDi function: •Lights up in green: Intel® WiDi connection in progress (communication in progress) •Flashes in green: Intel® WiDi connection preparation in progress •Lights up in orange: Intel® WiDi standby for connection (connection preparation completed) 2 Reset button This resets the product.
Connections Insert the enclosed wireless LAN unit or a commercially-available USB memory or SD memory card into the product.
• Insert the wireless LAN unit into the product first before turning on the power supply. • Insert the SD memory card into the slot for the SD memory card so that the label faces the top of the product.
• Please refer to the paragraph on “Specifications” for the specifications of the USB memory, SD memory card that can be used.
Installation Attach this product to the display main unit or projector main unit. Depending on the display, an optional slot board conversion adapter SB-02AM may be required. Refer to the Quick Start Guide of the SB-02AM on how to install the SB-02AM.
Check with your dealer for the compatible displays and projectors that can be used. CAUTION: • During installation, do not leave any foreign objects inside the display or projector. Do not drop the product, screws and optional slot cover as well. 1.
Installation of protector for wireless LAN unit 1. Remove the screws for securing the protector at the top of the USB Port where the wireless LAN unit is going to be connected. NOTE: • The wireless LAN unit can be inserted into either USB Port 1 or USB Port 2. CAUTION: • Do not lose the removed screws. Do not leave them inside the device as well. 2. Insert the wireless LAN unit to the USB Port. 3. Attach the protector for the wireless LAN unit.
Installation of protector for SD memory card 1. Remove the screws for securing the protector at the top of the slot for the SD memory card. CAUTION: • Do not lose the removed screws. Do not leave them inside the device as well. 2. Insert the SD memory card into the slot for the SD memory card. 3. Attach the protector for the SD memory card. At this point, fit the two studs on the protector into the square holes on the front panel of the product. 4. Securely fasten the protector with the screws.
Installation of adapter for wireless LAN unit Depending on the model of the display, when an external speaker is fitted, the wireless LAN unit may interfere with the external speaker, making direct connection to the product impossible. In this case, use an adapter for the wireless LAN unit (hereinafter “adapter”) and a USB extension cable to install the wireless LAN unit to the back of the display etc. 1.
Basic Operation Preparations For displays •Remote control enclosed with the display For projectors •Remote control enclosed with the projector •Dedicated remote control for operating the product Display remote control 1 POWER ON button Turn on the power of the display. 2 STANDBY button Turn off the power of the display. 3 SWITCH INPUT button (OPTION) Switch the video input of the display to the product. 4 SWITCH AUDIO INPUT button (AUDIO INPUT) Switch the audio input of the display.
Dedicated remote control for the projector 1 NUMBER button, PLAY button Used for the input of numbers. When playing contents with the media player, the functions are as follows. 1: Back, 2: Playback, 3: Skip, 5: Stop, 6: Pause. POWER ON STANDBY 2 MENU button Used for the menu operations of the product. 3 UP button ( ) Move to the setting at the top of the menu screen. 4 DOWN button ( ) Move to the setting at the bottom of the menu screen.
Operations and settings of the display and projector For displays (1) Connect the power cable to the display first before connecting to the electrical outlet.
(2) Turn on the main power of the display.
(3) The video input of the display changes to the product upon pressing the OPTION button on the remote control of the display.
(4) The audio input changes upon pressing the AUDIO INPUT button on the remote control of the display. Set the input to “OPTION” to select the audio of the product.
Function Controls 1. Wireless Display Video from a computer that supports Intel® Wireless Display (hereinafter “Intel® WiDi”) can be received and displayed on a display or projected with a projector. Computer that supports Intel® Wireless Display Projector or display which is connected to this product NOTE: • Refer to the user’s manual of the computer and the Intel website for details on the use and update of the Intel® WiDi software.
(3) Start up the Intel® WiDi software with the computer. (4) Operate the Intel® WiDi software to select “SB06WC” (adapter name of the product when shipped from the factory) and then click [Connect]. If the adapter name has been changed, select the specified adapter, and then click [Connect]. NOTE: • Depending on the operating environment, the product “SB06WC” may not be detected. In that case, click [Scan] to scan again. • For Windows® 8.
2. Media Player 2-1. Overview Repeat the playback of video, still image and audio files stored in the same folder of the SD memory card or USB memory in the order of the character code of the filename. NOTE: • Multiple videos and still images can be selected but only one can be displayed at any one time.
• Contents from multiple folders cannot be selected at the same time.
• Create the folder in the root directory.
The playback image is as follows when “Audio” is selected in the audio selection settings. Playback time (sec.) 0 Display 10 20 Image-1.jpg Image-2.bmp Audio Audio-1.mp3 30 Movie.wmv 40 thereafter, playback will be repeated 以降、リピート再生 thereafter, playback will be repeated Audio-2.wav Starts playback The playback image is as follows when “Video” is selected in the audio selection settings. Playback time (sec.) 0 Display Audio 10 20 30 40 Image-1.jpg Image-2.bmp Movie.
2-4. Settings (1) Configure the respective settings for the auto play mode and manual play mode. How to display the setting menu of each play mode [In the case of auto play mode] (1) Select [Settings] - [Applications] - [Media Player] from the home screen.
(2) The setting screen for the auto play mode is displayed. [In the case of manual play mode] (1) Select [Media Player] from the home screen.
(2) Select [Manual Play Mode Settings] at the bottom left of the drive selection screen.
(4) Select the video and still image files to be displayed. (1) Use the / /-/+ buttons to align the focus on the file you want to select and press the SET button to select the file. Press the SET button again to cancel the selection. NOTE: • Upon being selected, a check mark will appear on that thumbnail.
• For video files, a movie mark will appear on that icon.
• The maximum number of files that can be displayed on the file selection screen at any one time is 15.
(6) Playback of contents • Select [Play] in the video, still image or audio selection screen to start the playback.
• Press the remote control buttons to perform the following actions during playback. 2/ (Play) 5/ (Stop) 6 / I I (Pause) 3/ 1/ I I (Skip) (Back) OPTION MENU EXIT : Start the playback of contents from the pause state.
: Stop the playback of contents and return to the menu screen.
: Stop playback and continue showing the displayed contents.
: Play the next contents.
3. Settings 3-1. Overview Display product information, configure various settings, format the media and so on.
Select [Settings] in the home screen to display the main screen of the setting menu. Password Setting • The setting menu can be protected by a password. Upon setting a password, a password entry screen will appear for you to enter the password when the setting menu is selected. Please remember your password as entry to the setting menu will be denied if the password is wrong.
3-2. About Displays the information of the SD memory card and USB memory connected to the product.
Select [About] from the main screen of the setting menu. Item Displays Model Product name “SB-06WC” Serial Number Serial no.
Lower bandwidth mode Limit the bandwidth used for Intel® WiDi.
The default is “Disable”. [Setting] 1) Disable : Do not set the mode to the low bandwidth mode. 2) Enable : Set the mode to the low bandwidth mode. 3-3-2. Media Player settings Configure the settings for the play mode and auto play mode of the media player.
Select [Application]–[Media Player] from the main screen of the setting menu for the setting screen. Item Settings Media Player mode Sets the playback mode of the media player.
Item Settings SD Content update If a SD memory card is inserted, the files saved in the USB memory will be automatically copied to the SD memory card.
The files will be copied when the USB memory is inserted, or when the media player function is selected with the USB memory inserted.
The contents copied vary depending on the playback mode. •In the auto play mode, only the files in the Contents folder are copied. •In the manual play mode, all the folders and files in the folders are copied.
Item Settings Transition type Specify the transition type. [Settings] 1) Fade-in Image 1 Image 2 Image 3 (Transition time) 2) Fade-out Image 1 Image 2 Image 3 (Transition time) 3) Cross-fade Image 1 Image 2 Image 3 (Transition time) 4) None Image 1 Image 2 Image 3 (Transition time) NOTE: • Only one type of image transition can be specified.
• When cross-fade is selected, the switchover between videos will be fade-out followed by fade-in.
Item Settings Content aspect Set the display method for videos and still images. [Settings] 1) Full: Change the aspect ratio of the image to occupy the entire screen of the display.
2) Normal: Maintain the aspect ratio of the image.
3-4. General Configure the settings for the menu display language, date and time, startup mode and splash screen display.
Select [General] from the main screen of the setting menu for the setting screen. Item Settings Language Selects the language of the menu screen.
The default is “English”. [Settings] •English •German •French •Italian •Spanish •Swedish •Japanese Date Set the current date (Month/Day/Year). [Setting Method] (1) Press the SET button after selecting this setting.
3-5. System Security settings, media formatting, product firmware update and initialization of product settings etc. are performed.
Select [System] from the main screen of the setting menu for the setting screen. 3-5-1. Security Password for setting menu The [Settings] menu in the home screen can be protected by a password.
A 4-digit number is specified for the password.
No password is set when the product is first shipped from the factory.
3-5-2. Initialization Initialize the SD memory card or USB memory.
If a drive ID has been set, it will be written into the SD memory card or USB memory. [Operating Method] (1) After selecting [Drive], select [Done] at the bottom right of the screen and press the SET button.
(2) When the message “Initialize SD card?” or “Initialize USB memory?” appears, select [OK] and press the SET button. To cancel initialization, select [Cancel] and press the SET button.
3-5-4. Reset Return the product settings to the default state when first shipped from the factory. Or start up the product again.
Item Contents Reset all settings Return all general and system settings and the product’s Intel® WiDi and media player to the default state when first shipped from the factory. Reset Intel® WiDi settings Return the Intel® WiDi settings to the default state when first shipped from the factory.
Troubleshooting General Audio cannot be heard from the display. [When the product is connected to a display] • Set the audio input of the display to “OPTION”. To do so, press the AUDIO INPUT button and set the selected audio input (AUDIO) shown at the top right of the screen to “OPTION”.
• Set the AUDIO setting in the display OPTION to DIGITAL. To do so, press the MENU button, select [ADVANCED OPTIONS] - [OPTION SETTING] and set [AUDIO] to [DIGITAL].
Media Player Function SD memory card or USB memory is not recognized. • Re-insert the SD memory card or USB memory.
• Check whether the file system of the SD memory card or USB memory is compatible with the product or not.
• The SD memory card or USB memory may be damaged. Check whether it can be recognized correctly on the computer. The files stored in the SD memory card or USB memory do not appear in the contents selection screen. • The contents may not be supported.
Specifications Wireless Display Media Player SB-06WC USB port USB2.
Compatible formats of the media player (1) Video Type Video/Audio MPEG2, MP2/MP3 Video WMV9, WMA9 H.264/AVC, AAC Details Codec extension MPEG2 .mpg MPEG-1 Audio layer 2 MPEG-2 Audio layer 2 MPEG-1 Audio layer 3 MPEG-2 Audio layer 3 .mpeg Audio Codec Channel 2ch Video Codec Windows Media Video 9(WMV3) Audio Codec Windows Media Audio 9 Windows Media Audio 9 Professional Channel 2ch Video Codec H.264/AVC Audio Codec Advanced Audio Coding Channel 2ch .wmv .
