User manual

Major Changes
Page Description
All The 44-pin plastic QFP package has been changed from µPD750008GB-xxx-3B4
to µPD750008GB-xxx-3BS-MTX.
The µPD75P0016 under development has been changed to the already-developed
µPD75P0016.
The input withstand voltage at ports 4 and 5 during open drain has been changed from
12 V to 13 V.
Preface English-version document numbers have been added to "Related documents."
p.4 The format of the table in Section 1.3 has been changed.
p.45 The caution in using Mk II mode has been added in Section 4.1.1.
p.85 The description for the mask option when using the feedback resistor has been added in
(6) in Section 5.2.2.
p.187 The description for the interrupt enable flag has been added in Section 6.3.
p.198 Table 6-4 has been added in Section 6.6.
p.233 Section 9.4 has been added.
p.235 Chapter 10 has been added.
p.237–298 The operand @rpa has been changed to @rpa1 in Section 11.
p.241 @rpa1 has been added in the table in (1) in Section 11.2.
p.264 The title of Section 11.4 has been modified to conform to that of Section 11.2.
p.301 Appendix B
Supported OS versions have been upgraded.
p.321 Appendix F has been added.
The mark
*
shows major revised points.