User's Manual

- 24 -
To retrieve
• Lift handset or press Speaker.
• Press held line. Use handset to converse.
NOTE: Only Dterm that set Exclusive Hold option can retrieve the call.
If unanswered
• After preprogrammed time, Automatic Recall is initiated.
• Visual and audible signal (rapid flash and ring burst) is sent to station
which placed call on Exclusive Hold. Recall shows as a flashing green
LED on your phone, and solid red on other phones with same line.
NOTE: Exclusive Hold excludes any other phone from picking up your
held call. Exclusive Hold shows as a flashing green LED on your phone.
The same line on other phones appears as a solid red LED.
TO PLACE A CALL ON REMOTE HOLD
To initiate:
• While in conversation with Station/Trunk Party
• Press the TRANSFER key. Receive interrupted dial tone
• Dial destination station's extension.
• Receive ring back tone.