User's Manual

- 27 -
CALL BACK (STATION)
• Lift handset or press Speaker.
• Dial desired station number and receive busy tone or ring back tone.
• Press Call Back or dial 2 and receive service set tone.
• Restore handset.
• When busy station becomes idle or the station that did not answer initiates
or answers a call or accesses a feature and then becomes idle, the setting
station is alerted by ring and flashing LED.
TO ANSWER A CAMPED-ON CALL
• While engaged in a call, receive the camp-on
indication
(one short tone burst). Answer LED flashes.
• Press Answer. Call in progress is placed on hold.
• Connection to camped-on call is established.
• Press Answer to return to original call. Camped-on call is placed
on hold.
• Repeated depression of the Answer button allows you to alternate
between calls. Display indicates connected station or trunk at any given
time.