Owner's Manual

ManualsBrandsNEC ManualsphonesDTerm Series 80

NEC DTerm Series 80

TELEPHONE USER GUIDE

I P K II

To Place an Outgoing Call Page 6

• Lift handset or press

Speaker

• Dial “9” or press a Line Key.

To Place an Intercom Call Page 9

• Lift handset or press

Speaker.

• Dial Extension number or One-Touch key.

• For privacy press “1” after the Extension or

One-Touch key to make phone ring.

To Place a Call on Hold Page 10

• With the caller on the line, press Hold.

Call Transfer Page 10

•

While call is in progress, press

Transfer

• Dial Extension, press One-Touch key or

dial

9 + number

for off-site transfer

• Announce call, if desired, hang up

Microphone Key Page 9

• Indicates whether calling party can hear you

Answer Key Page 5

• While you are on a call, press

Answer

the

current caller on hold and automatically

connect to the incoming call.

• This does not work on PRI or T-1.

Redial Key Page 19

• Press

Redial

until desired number appears

in the display, then lift the handset.

Group Listening Page 9

• While on a handset call press

Speaker

twice. The conversation is now heard over

the speaker.

Conference Calling Page 11

• While call is in progress, press

Conf.

• Dial number of 3

party.

• Receive answer, then press

Conf

twice.

• Repeat to add more parties.

Call Park Page 12

• While call is in progress, press

Transfer

then press

Park

and dial zone

64.

• Page party with zone that you parked call.

• To pick up the call, lift the handset and

press

Pick Up

and dial zone (

)

that was announced.

Paging Page 22

• Lift handset and press

Page

• Lift handset and dial following codes

• Internal All

7010

• External All

7030

• Internal and External All

*10

Do Not Disturb

• Press

DND

or lift handset & dial

747

• Dial

to block all calls.

• Dial

to cancel.

Call Forward Page 24

• Press

Call Fwd

or dial

741

• Dial

, then dial extension or

+ phone

number for off-premise, then hang up.

• To cancel, press

Call Fwd

or dial

741

• Dial

Program DSS Buttons Page 36

• Lift handset and dial

751

• Press key to be programmed.

• Dial

+ extension,

Hold

twice.

• Dial

to clear key.

Summary of content (2 pages)

PAGE 1
To Place an Outgoing Call Page 6 NEC DTerm Series 80 TELEPHONE USER GUIDE • • Lift handset or press Speaker Dial “9” or press a Line Key. To Place an Intercom Call Page 9 • • • Lift handset or press Speaker. Dial Extension number or One-Touch key. For privacy press “1” after the Extension or One-Touch key to make phone ring.
PAGE 2
Soft Keys. The 4 gray buttons just below the LCD screen are called soft keys. These buttons can be used for a variety of things. List If you press the List button, you can next press the softkey under Redial to see a list of the Prog (Programming) – DND (Do Not Disturb). If you press SET, you can set Do Not Disturb for: Ext (external calls) Icm (Intercom calls) All (All Calls) or Cfw to (Incoming calls that are forwarded to you). Wait a few seconds for DND and DND cancel to take effect.