User’s Manual E654 E554 E464 E424 E324
Index Precautions And Reminders ���������������������������������������������������������������� English-1 Important Safety Instructions ��������������������������������������������������������������� English-2 Important Information �������������������������������������������������������������������������� English-5 Declaration Of Conformity ������������������������������������������������������������������English-11 Contents ����������������������������������������������������������������������������������
Do not place the TV in confined spaces or in a box when in use. Maintain ample ventilation for the TV when in use. Do not open the TV cabinet. Call a NEC certified service personnel for any internal service needed for your TV. Keep the TV away from direct sunlight, dust, humidity, and smoke. Unplug immediately if the TV falls. Unplug immediately if there is a TV malfunction such as a loss of audio / video, the presence of smoke, or a bad odor coming from the TV.
Important Safety Instructions Read before operating equipment Follow all warnings and instructions marked on this TV. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.
NOTE: To the TV system installer: This reminder is provided to call attention to Article 820-44 of the National Electric Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the facility, as reasonably close to the point of cable entry as possible English-3 English 17. Follow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer. 18.
WARNING: To prevent the apread of fire, keep candles or other open flames away fram this product at all times. IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • • • • • • Using cabinets or stands recommended by the manufacturer of the television. Only using furniture that can safely support the television.
English Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET.
Power source This LCD TV operates on 120 volts 60 Hz, AC current. Insert the power cord into a 120 volts 60 Hz outlet. The mains plug is used as the disconnect device and shall remain readily operable. To prevent electric shock from the TV, do not use with an extension cord, receptacle, or other outlet unless the blades and ground terminal can be fully inserted to prevent blade exposure. Never connect the LCD TV to 50 Hz, direct current, or anything other than the specified voltage.
• Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed.
Install on the wall 11 7/8 inches 30 cm 4 inches 10 cm 4 inches 10 cm Leave at least this space around the set. 4 inches 10 cm 2.36 inches 6 cm For use only with UL Listed Wall Mount Bracket with minimum weight / load: Please refer to the Specification on page 36 and page 39 . Unit without base weight: The equipment and its associated mounting means still remain secure during the test.
English Installed with stand 11 7/8 inches 30 cm 4 inches 10 cm 4 inches 10 cm Leave at least this space around the set. 4 inches 10 cm Never install the TV set where air-circulation is blocked. Objects and ventilation holes Never push objects of any kind into the TV through the cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or an electric shock. Do not place any objects on the TV.
License Notice and Trademark Acknowledgement Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. All other brands and product names are trademarks or registered trademarks of their respective owners. ® HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: NEC Display Solutions of America, Inc. Address: 500 Park Boulevard, Suite 1100 Itasca, Illinois 60143 Tel. No.
FCC Information: 1. Use the attached specified cables with the E654/E554/E464/E424/E324 color monitor so as not to interfere with radio and television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance. (2) Please use the supplied shielded video signal cable, Mini D-SUB 15 pin to Mini D-SUB 15 pin. 2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
English Contents Your new NEC monitor box*1 should contain the following: • • • • • • • • • • Monitor (1) TV Stand base (1) Stand Screw (4) Stand Neck (1) (Only E324) Neck Screw (4) (Only E324) Remote control (1) 1.
Preparation IMPORTANT: Do not apply pressure to the TV screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. Attaching the Base E654 Stand Screw x 4 E654:M6 (16mm) E554 / E464 / E424 Stand Screw x 4 E554/E464/E424:M4 (10mm) E324 Neck Screw x 4 E324:M4 (12mm) Stand Screw x 4 E324:M4 (8mm) 1. Place the TV face down on a soft and flat surface to prevent scratching and damage. 2.
English Using Cable Clamper Tie the cables together using the cable clamper. Preparing Your LCD TV For Wall Mounting (optional) We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your TV on the wall, you need to remove the base. For your safety, only mount with a UL listed wall mount bracket that supports the weight of the TV.
E554/E464/E424/E324 VESA Hole Neck Screw 1. Loosen the screws on the back of the stand-base, and remove the base. 2. Secure the wall mount bracket to the back of your TV using four M4 screws (for 32" only) or M6 screws (for 42"/46"/55" only). screen size (inches) required pitch (mm) VESA Hole depth 55 400 × 400 4 × M6 (24mm) 46 400 × 400 4 × M6 (19mm) 42 400 × 400 4 × M6 (21mm) 32 100 × 100 4 × M4 (22mm) NOTE: Wall mounting solution is not included with the unit and is sold separately.
Ensure that the LCD TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. Do not place the TV near any open flames. Do not allow the TV to be placed in an environment where it can be exposed to heat, direct sunlight, or rain and water. Do not expose the equipment to any liquid.
Battery Installation and Replacement The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Open the battery cover of the remote control by pushing and pulling it in the direction of the arrow. 2. Insert two new “AAA” size batteries for the remote control. When replacing old batteries, push them towards the springs and lift them out. 3. Match the batteries to the (+) and (-) marks in the battery compartment. 4.
Press the power button on the remote control or press the power button located on the side of the TV. The TV will power on. Power button or Power Mode Status Mode On Standby Warming up LED Status None Red Blinking Red Warming up mode can automatically turn the Monitor power on when signal appears. Press the power button on remote control or on side keypad can power on the Monitor in standby mode.
Source Connection Guide E654 AC POWER ❶ ❷ COMPONENT/AV IN SPDIF OUT ❼ Y/AV Pb/Cb Pr/Cr ❻ L ❸ PC IN R ANT/CABLE ❺ AUDIO VGA ❹ 1. RS-232C – Input from external equipment such as a PC or AV control system in order to control RS-232C functions. 2. HDMI (HDMI1, HDMI2, HDMI3) – Connect your HDMI devices. 3. USB port – Used for accessing JPEG photo files. 4. PC IN (VGA / AUDIO) – Connect your PC video and audio. 5. ANT / CABLE – Connect an RF antenna or Analog Cable system. 6.
English E554 AC POWER ❶ ❷ COMPONENT/AV IN SPDIF OUT ❼ Y/AV Pb/Cb Pr/Cr ❻ L ❸ PC IN R ANT/CABLE ❺ AUDIO VGA ❹ 1. RS-232C – Input from external equipment such as a PC or AV control system in order to control RS-232C functions. 2. HDMI (HDMI1, HDMI2, HDMI3) – Connect your HDMI devices. 3. USB port – Used for accessing JPEG photo files. 4. PC IN (VGA / AUDIO) – Connect your PC video and audio. 5. ANT / CABLE – Connect an RF antenna or Analog Cable system. 6.
E464 / E424 / E324 2 ❸ VGA AUDIO Y/AV Pb/Cb ❼ Pr/Cr L USB 1 COMPONENT/AVIN ❷ ❸ ANT/CABLE PCIN 3 ❶ E464 / E424 ❹ SPDIF OUT E324 RS-232C IOIOI AC POWER ❺ R ❻ 1. RS-232C – Input from external equipment such as a PC or AV control system in order to control RS-232C functions. 2. USB port – Used for accessing JPEG photo files. 3. HDMI (HDMI1, HDMI2, HDMI3) – Connect your HDMI devices. 4. ANT / CABLE – Connect an RF antenna or Analog Cable system. 5.
English Once your AV device is connected, press the Source button on the remote control to select the relevant source to view. (ex: Press COMP button to select “Component” if you have connected a source to the Component input.
Operating Instructions Using The Side Panel Controls 1. VOL + Press to increase the volume. Press this button to shift Right in the OSD menu. 2. VOL - Press to decrease the volume. Press this button to shift Left in the OSD menu. 3. CH Press to change channels. Press this button to shift up in the OSD menu. 4. CH Press to change channels. Press this button to shift down in the OSD menu. 5. MENU Press to open or exit the OSD (On-Screen Display) menu. 6.
English Using The Remote Control (Power) Press to turn On/Off (standby) the power. (NOTE: To completely turn off the power, unplug the power cord from the power outlet.) TV Press to choose ATSC/NTSC tuner source mode. AV Press to choose Composite source mode. PRE CH COMP Press to choose Component source mode. HDMI/PC Press repeatedly to choose PC IN or HDMI source mode. 0~9/─ Press to select channel (Press "─" to choose the sub-channel). PRE CH Press to display the previous channel.
MTS Press to activate the NTSC tuner sounds such as Stereo, SAP, Monotone, and languages of the digital tuner. Wide Press to choose the display aspect ratio: Normal / Zoom / Wide / Cinema / Auto (Ratio availability varies by video inputs.) Audio Press to choose sound mode: Standard / Movie / Music / News / Custom. CH-List Press to display the Channel List. CC Press to activate the Closed Caption.
FHD (E654/E554/E464/ E424) WXGA (E324) Resolution Horizontal Vertical Nominal Nominal Sync Sync Freq. Freq. Polarity Polarity (kHz) (Hz) Nominal Pixel Clock (MHz) VGA DVI VGA DVI 640 × 480@60Hz ● ● ● ● 31.469 – 59.94 – 25.175 720 × 400@70Hz ● ● ● ● 31.469 – 70.087 + 28.322 800 × 600@60Hz ● ● ● ● 37.879 + 60.317 + 40 1024 × 768@60Hz ● ● ● ● 48.363 – 60.004 – 65 1280 × 720@60Hz ● ● ● ● 45 – 60 + 74.25 1280 × 800@60Hz ▲ ▲ ● ● 49.702 – 59.
Navigating The On-Screen Menu Press the Menu button to display and Exit button to close the main menu. Use the Navigation Ring to navigate, select, adjust or confirm an item on the OSD (On-Screen Display) menu. NOTE: Some features may only be available in a particular source mode. Video Menu Video Menu adjusts video items.
Audio Menu provides an audio adjustment for user to modify the audio setting. Sound Mode Video Standard 0 Balance Audio Advanced Audio Channels Reset Audio Settings Setup Adjust settings to affect sound quality. OK SELECT 4. Reset Audio Settings Reset Audio settings to factory default settings. Channels Menu Photos MOVE [Audio Language ] Select language options in digital channels. (Only available for digital channels) MENU RETURN EXIT EXIT 1. Sound Mode Select preset audio modes.
6. Audio Only 2. Parental Controls Play the audio only when picture Set TV parental controls. This is turned off. Any press of the function blocks out the picture button except the (Power) and sound of the selected rating button on the remote control will levels. turn on the picture. The factory preset password to enter Parental Controls feature 7. Auto Aspect is a 4-digit number 0000. Automatically adjust the picture aspect ratio according to the TV [Panel Lock] program.
4. Sleep Timer Select how long the TV will take to automatically turn intself off. Off / 5 / 10 / 15 / 30 / 60 / 90 / 120 / 180 / 240 (minutes) 5. Input Labels Create labels for the devices connected to your TV. (Only available for Non TV input source) 6. RGB Options (Only available for VGA input, and when there is VGA signal input) [Auto Adjust] Automatically adjust the image settings such as position. [H-Position] Adjust horizontal position. [V-Position] Adjust vertical position.
To control while in photo folder: • Press ▲, ▼, ◄, ► button to browse the photo files. • Press OK button to open a folder or a photo file which will be viewed on the full screen. • Press Menu button to return to USB Main Menu. • Press FAV button to add a photo file to favorite list or delete from favorite list. To control while in full-screen photo show: • Press ► button to go to the next image. Press ◄ button to go to the previous image. • Press OK button to rotate the image clockwise.
Care Of The Screen Do not rub or strike the screen with anything hard as this may scratch, mar, or even damage the screen permanently. Unplug the power cord before cleaning the screen. Dust the TV by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid cleaners, aerosol cleaners, or solvents of any kind.
Manufacturer’s Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
This model complies with the specifications listed below. Reorient or relocate the receiving display. Designs and specifications are subject to change without notice. This model may not be compatible with features and/or specifications that may be added in the future. Model Name E654 E554 DISPLAY Viewable 65” 55” Resolution 1,920 × 1,080 Color Over 16 million colors (depending on video card used) Horizontal: Frequency Vertical: 31 ─ 83 KHz (Analog input) 15.625/15.
Model Name E654 E554 CONNECTIONS (Side) RS-232C 9 Pin D-sub HDMI 1 / 2 / 3 Type A Connectors USB USB2.0 DC 5V, Max. 500mA WEIGHT & DIMENSION Dimensions w/ Stand and Base (W × H × D) (inch) 57.77 × 36.38 × 14.17 48.86 × 31.1 × 10.8 Dimensions w/o Stand and Base (W × H × D) (inch) 57.77 × 34.34 × 3.94 48.86 × 28.94 × 2.47 Weight w/ Stand and Base (lbs) 77.1 lbs 51.35 lbs Weight w/o Stand and Base (lbs) 66.3 lbs 44.
E654 E554 STORAGE ENVIRONMENT Temperature -10°C ─ 60°C / 14°F ─ 140°F Relative Humidity 5% ─ 85% Absolute Air Humidity 1─25 g/m3 Max. Change of Temp. 0.5°C/min (max. 10°C / 30min) Air Pressure 795 ─ 1,060 mbar (79.5─106Kpa) Radiation Solar Heat 700 W/m2 PACKAGE CONTENTS Supplied Accessories Monitor (1) TV Stand base (1) Stand Screw (4) Remote control (1) 1.
Model Name E464 E424 E324 DISPLAY Viewable 46” 42” Resolution 1,920 × 1,080 Color Over 16 million colors (depending on video card used) Horizontal: Frequency Vertical: 32” 1,366 × 768 31 ─ 83 KHz (Analog input) 15.625/15.
E464 E424 E324 WEIGHT & DIMENSION Dimensions w/ Stand and Base 41.18 × 26.54 × 8.43 37.68 × 24.69 × 8.43 28.57 × 19.5 × 8.43 (W × H × D) (inch) Dimensions w/o Stand and Base (W × H × D) (inch) 41.18 × 24.52 × 2.47 37.68 × 22.56 × 2.47 28.57 × 17.43 × 2.47 Weight w/ Stand and Base (lbs) 34.51 lbs 28.48 lbs 18.51 lbs Weight w/o Stand and Base (lbs) 25.99 lbs 14.77 lbs 32.
Model Name E464 E424 E324 PACKAGE CONTENTS Supplied Accessories Monitor (1) TV Stand base (1) Stand Screw (4) Stand Neck (1) (Only E324) Neck Screw (4) (Only E324) Remote control (1) 1.5 V AAA batteries (2) Power cord (1) D-sub cable (1) User’s manual (1) All specifications, weights, and dimensions are subject to change without prior notice. Please access www.necdisplay.com for detailed specifications and dimensions for custom installations.
PC control of the TV Attach an RS-232C cable cross-type (commercially available) to the supplied RS-232C for the connections. NOTE: This operation system should be used by a person who is accustomed to using computers. Communication procedure Send the control commands from the PC via the RS-232C connector. The TV operates according to the received command and sends a response message to the PC. Do not send multiple commands at the same time.
Before Calling Service Please make these simple checks before calling service. These tips may save you time and money as charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms “Ghost ” or double image when using the tuner No power No picture Good picture but no sound Items To Check And Actions To Follow • This may be caused by an obstruction to the antenna due to high rise buildings or hills.
HDTV HDTV displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines. HDMI Inputs High-Definition Multimedia Interface Audio / Video Inputs are located on the receiver. These connectors are used for the input of audio and video signals. Designed to receive higher picture resolution and offer sound connection options. Menu An on-screen listing of features shown on the TV screen is made available for user adjustments.
Limited Warranty NEC Display Solutions of America, Inc. (hereinafter “NEC DISPLAY SOLUTIONS”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NEC DISPLAY SOLUTIONS’ sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase.
English-45 English This Product is warranted in accordance with the terms of this limited warranty. Consumers are cautioned that Product performance is affected by system configuration, software, the application, customer data, and operator control of the system, among other factors, While NEC DISPLAY SOLUTIONS Products are considered to be compatible with many systems, specific functional implementation by the customers of the Product may very.
References NEC Monitor Customer Service & Support Customer Service and Technical Support Parts and Accessories (800) 632-4662 (888) 634-4662 Fax (800) 695-3044 Warranty Information www.necdisplay.com Online Technical Support www.necdisplay.com Sales and Product Information Sales information Line (888) 632-6487 Canadian Customers (866) 771-0266, Ext#: 4037 Government Sales (800) 284-6320 Government Sales email gov@necdisplay.com Electronic Channels http://www.necdisplay.com Product Registration http://www.
