User Manual
English-24
Features
Picture By Picture/Picture In Picture: Two different input sources can simultaneously be screened side by side (Picture By
Picture) or a small sub screen on a large main screen (Picture In Picture), which increases job productivity.
DisplayPort OUT: This monitor has a DisplayPort out connector for daisy-chain connection. Multiple monitors can be connected
without complicated cable management.
TILE MATRIX, TILE COMP: Shows one image over multiple screens with accuracy while compensating for bezel width.
USB Hub 2 up streams: Two computers can be controlled by a single keyboard and mouse with an USB SELECT feature.
ControlSync: Follow the steps of “DATA COPY” and copy the settings from the master monitor to the sub monitors
by connecting the ControlSync cable. When the setting of the master monitor is adjusted, it is sent to the sub monitors
automatically, providing easy setting controls in a multiple monitor environment.
INDIVIDUAL ADJUST: A designated main monitor can adjust sub monitor(s) by OSD. It is good for multi-setting monitors which
are positioned far from the user.
Human/Ambient Sensors: Controls screen brightness according to user presence and ambient light status for less power
consumption.
LOW BLUE LIGHT: This monitor has a blue light reducing function. This means hazardous light from the monitor is substantially
reduced and it allows to free from eyestrain (see page 17).
Flicker Free: Special backlight system reduces fl icker for less eyestrain.
UNIFORMITY: This feature compensates for slight variations in the white uniformity level that may occur on the screen and
improves the color and evens out the luminance uniformity of the display.
Hardware Calibration: Adjusts brightness, colors and gamma curve for your preference with software and color sensor.
USB Monitor Control: Allow you to adjust each item through application software by connecting an USB cable.
RESPONSE IMPROVE: Improved gray to gray response.
CUSTOMIZE SETTING: Allows to store the current settings and recover stored settings.
NaViSet Administrator 2 Software: Offers an expanded and intuitive graphical interface, allowing you to more easily adjust
OSD display settings from network PC.
Environmental Impact: Annual typical maximum operating carbon footprint of this monitor (world-wide average) is
approximately 55.4 kg (calculated by: rated wattage x 8 hours per day x 5 days a week x 45 weeks per year x Power-to-Carbon
conversion factor - conversion factor is based on OECD publication of global CO2 emissions 2008 Edition). This monitor has a
manufacturing carbon footprint of approximately 64.3 kg.
Note: The manufacturing and operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC for
its monitors.
ErgoDesign Features: Enhanced human ergonomics to improve the working environment, protect the health of the user and
save money. Examples include OSD controls for quick and easy image adjustments, tilt base for preferred angle of vision, small
footprint and lower emissions.
Plug and Play: The Microsoft
®
solution with the Windows
®
operating system facilitates setup and installation by allowing
the monitor to send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically
optimizing display performance.