User Manual

English-28

Multi Display setting

You can display a image by using multiple monitors with any input signals.

[Example of V MONITOR 5, H MONITOR 5 (See page 21)]

1. Touch the MENU/EXIT key to display OSD menu.

2. Move the LEFT/RIGHT key left or right to select MULTI DISPLAY.

3. Move the DOWN/UP key down to select H MONITOR. Move the LEFT/RIGHT key left or right to set H MONITOR 5.

4. Move the DOWN/UP key down to select V MONITOR. Move the LEFT/RIGHT key left or right to set V MONITOR 5.

5. Move the DOWN/UP key down to select MONITOR NO. then set monitor number individually.

A monitor located at buttom left must be 1 (master monitor).

When you set monitor number to a monitor, please install the monitor at the same spot where assumed installation ﬁ gure is

shown as black.

12345

678910

11 12 13 14 15

16 17 18 19 20

21 22 23 24 25

6. Move the DOWN/UP key down to select TILE MATRIX ENABLE then set it to ON.

Set all connected monitors individually by following the above procedure from 1 to 6.