user manual

CHAPTER 4 NDA-24282
Page 70
Revision 1.0
PA-PC56-A (COPY)
5. Switch Settings
Standard settings of various switches on this circuit card are shown in the table below.
SWITCH
NAME
SWITCH NO. SETTING
STANDARD
SETTING
MEANING
MB
UP Circuit card make busy.
DOWN Circuit card make idle.
SREQ
UP Separate mode request.
DOWN Separate mode request cancel (Copy mode).
SW0
1
ON
To be set in the case of System No. 0.
(To be mounted in Slot No. 08 of APMA.)
OFF
To be set in the case of System No. 1.
(To be mounted in Slot No. 17 of APMA.)
2OFF×
3OFF×
4OFF×
5ON×
6ON×
7ON×
8ON×
Fixed