user manual

Page 58 NDA-30103 Revision 4
Configuring the User Options OpenWorX Business Attendant System User Guide
Setting the Health Check Server Interval
The Business Attendant Client periodically checks to see if the Business Attendant
Server is working properly. You can configure how often the Business Attendant
Client checks the Business Attendant Server in the Business Attendant Client
Options dialog box.
Use the following steps to set the Health Check Server Interval.
1. Choose Options > Preferences on the Line Status window (Figure 3-1 on page
26). The Business Attendant Client Options dialog box displays (Figure 4-1 on
page 52).
2. Select the General tab.
3. Enter the desired number of seconds the Business Attendant Client will wait
between server health checks in the Health Check Server Interval field. The
Health Check Server Interval can be configured for a minimum of 10 seconds
and a maximum number of 60 seconds.
Figure 4-5 Health Check Server Interval field
4. Click OK.The Business Attendant Client Health Check Server Interval is
changed.